Datasheet

Specifications
Model
Port size
Mass (Bottom ported)
Mass (Rear ported)
Leakage
Piping Specifications
02
R1/4
117 g
89 g
1 x 10
–5
Pa·m
3
/s 1 x 10
–10
Pa·m
3
/s
N02
NPT1/4
118 g
90 g
F02
G1/4
—
86 g
C01
Rc1/8
114 g
86 g
A2
URJ1/4
120 g
92 g
B2
TSJ1/4
111 g
83 g
∗ G1/4 is available for rear ported only.
R1/4, NPT1/4, G1/4
∗
, URJ1/4, TSJ1/4, Rc1/8
Piping direction: Rear/Bottom
Anti-chattering, Zero-out, Key lock function, Auto-preset, Auto-shift,
Unit display switching, Power-saving mode
IP65
Operating: 0 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Operating/Stored: 35 to 85% RH (No condensation)
250 VAC for 1 minute between live parts and case
2 MΩ or more between live parts and case (at 50 VDC Mega)
10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 20 m/s
2
acceleration,
in X, Y, Z directions, for 2 hours each (De-energized)
100 m/s
2
in X, Y, Z directions, 3 times each (De-energized)
±3% F.S. (Based on 25°C, within operating temperature range)
CE marking, UL/CSA, RoHS compliance
Model
Rated pressure range
Set pressure range
Withstand pressure
Wetted parts material
Applicable fluid
Port size
Power supply voltage
Current consumption
Repeatability
Switch
output
Auto-shift input
Display
Display accuracy
Indicator light
Temperature characteristics
Lead wire
Standards
Maximum load current
Maximum load voltage
Residual voltage
Response time
Short circuit protection
Enclosure
Operating temperature range
Operating humidity range
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Hysteresis
Hysteresis mode
Window comparator mode
Linearity
Output impedance
Analog
output
Environment
resistance
Function
Voltage
output
Output voltage
(Rated pressure range)
Load impedance
Current
output
Output current
(Rated pressure range)
Linearity
ISE80
(Positive pressure)
–0.100 to 1.000 MPa
–0.105 to 1.100 MPa
2 MPa
Pressure sensor: Stainless steel 630, Fitting: Stainless steel 304
Fluids do not corrode stainless steel 630 and 304
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)
45 mA or less
NPN 1 output, NPN 2 outputs, PNP 1 output, PNP 2 outputs
80 mA
28 V (at NPN output)
1 V or less (with load current of 80 mA)
2.5 ms (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Yes
±0.2% F.S. ±1 digit
Variable (0 or above)
±1% F.S. or less
Approx. 1 kΩ
500 kPa
1 to 5 V ±2.5% F.S.
±1% F.S. or less
Non-voltage input (Reed or Solid state), Low level: 0.4 V or less, 5 ms or longer input
3 1/2-digit, 7-segment, 2-color LCD (Red/Green)
±2% F.S. ±1 digit (Ambient temperature of 25 ±3°C)
Lights up when output is turned ON. OUT1, OUT2: Orange
Maximum load impedance: 300 Ω (Power supply voltage 12 V)
600 Ω (Power supply voltage 24 V)
Minimum load impedance: 50 Ω
2.4 to 20 mA
±2.5% F.S.
3.2 to 20 mA
±2.5% F.S.
4 to 20 mA ±2.5% F.S.
ISE80H
(Positive pressure)
–0.100 to 2.00 MPa
–0.105 to 2.20 MPa
4 MPa
ZSE80
(Vacuum pressure)
0.0 to –101.0 kPa
10.0 to –111.0 kPa
ZSE80F
(Compound pressure)
–100.0 to 100.0 kPa
–110.0 to 110.0 kPa
0.6 to 5 V ±2.5% F.S. 0.8 to 5 V ±2.5% F.S.
Oilproof heavy-duty vinyl cable, 3 cores (N.P)
4 cores (A.B)
5 cores (R.T.S.V)
ø3.5, 2 m
Conductor area: 0.15 mm
2
(AWG26)
Insulator O.D.: 0.95 mm
733
Series ZSE80/ISE80
2-Color Display Digital Pressure Switch
For General Fluids
ZSP
PS
ISA
PSE
IS
ISG
ZSM
ZSE
ISE
P0694-P0755-E.qxd 08.8.27 6:29 PM Page 733