User Manual

-17-
No.SFOD-OML0002-A
Specification
■Specifications
Item IZH10
Rated charge amount range ±20.0 kV
Minimum display unit 0.1 kV (±1 kV to 20 kV), 0.01 kV (0 to ±0.99 kV)
Measuring distance 50 mm (between the detection port and measured target)
Power supply
∗
1
1.5 VDC 2 A alkali dry cell battery (2 pcs.) (continuously used for 15 hours
∗
2
)
Display accuracy ±5%F.S. ±1 digit
Enclosure IP40
Operating temp. range Operation: 0 to 40
o
C, Storage: -10 to 60
o
C (no freezing and condensation)
Environment
Operating humidity range Operation/Storage: 35 to 85%R.H. (no condensation)
Material Display: PC/ABS, Sensor: ABS
Weight 85 g (excluding batteries)
Standard CE marking
Accessories Ground wire (IZH-A-01), Soft case (IZH-B-01)
∗1: 2 A alkali dry cell batteries (2 pcs.) are not included, and must be prepared separately.
∗2: When using new batteries at ordinary temperature.
■Characteristics graph (for reference)
There will be difference between the actual value and displayed value of charged potential depending on
the measuring distance between the measured target and the sensor. The shaded part shows the
deviation in a measuring distance range of 25 to 75 mm.