Datasheet

View
Allowable
interval
Allowable
interval
View
[mm]
Bore size Allowable interval
ø12 (ø10 x 2)
15
ø16 (ø12 x 2)
15
ø20 (ø16 x 2)
15
ø25 (ø20 x 2)
10
ø32 (ø25 x 2)
5
ø40 (ø32 x 2)
0
ø50 (ø40 x 2)
0
ø63 (ø45 x 2)
0
ø80 (ø56 x 2)
0
ø100 (ø71 x 2)
0
Auto Switch Mounting
Applicable
auto switches
D-M9m/M9mV
D-M9mW/M9mWV
D-M9mA/M9mAV
Bore size
ø12 (ø10 x 2) to ø100 (ø71 x 2)
Auto switch
mounting surfaces
Surfaces with auto switch mounting slot
Mounting of
auto switch
Auto switch
mounting screw
Auto switch
• When tightening the auto switch mounting screw, use a
watchmakers’ screwdriver with a handle 5 to 6 mm in diameter.
Tightening Torque for Auto Switch Mounting Screw [N·m]
Auto switch model Tightening torque
D-M9m(V)
D-M9mW(V)
D-M9mA(V)
0.05 to 0.15
When cylinders are adjacent to one another as shown in the figure below, provide a space between them of at least, the amount
shown in the tables below.
If the space is not sufficient, the magnets in adjacent cylinders may cause the auto switches to malfunction.
Caution on Proximity Installation
11
JMGP Series