Datasheet

Magnet Gripper
Adsorbs and Holds with a Magnet
Steel plates can be transferred
without a vacuum.
Supports workpieces with holes and uneven surfaces
where a vacuum pad cannot be used.
Holds workpieces even when air is shut off.
 High holding force 80 N (Workpiece plate thickness: 0.6 mm)
120 N (Workpiece plate thickness: 1.4 mm)
 Residual holding force 0.3 N or less (Reduces workpiece release time)
Holding force can be adjusted with a
bumper with 3 types of thicknesses.
Auto switches can be
mounted on 4 surfaces.
Mountable on 3 surfaces.
ReleaseAdsorption
Air supply
Air supply
Workpiece
Workpiece
Magnet
Piston
Magnet
Piston
Ports
Workpiece adsorption/holding Workpiece release
Thickness
Mounting screws
50 mm
50 mm
80.2 to
82.2 mm
Prevents deformation of workpieces and
accidental adsorption of a second piece.
Fluororubber with excellent oil resistance
is used. Has a contact surface structure
which reduces sideslip. Bumper can be
replaced without a tool.
Magnetic field resistant
auto switch:
D-P3DWA
Small auto switch:
D-M9mV
q
w
e
Bumper
Thickness Holding force
6 mm 80 N
7 mm 50 N
8 mm 30 N
INFORMATION
15-E653
MHM-X6400