Datasheet
Dimensions
4 x M5 x 0.8 Thread depth 7.5
Auto switch mounting groove
on workpiece release side
Auto switch mounting groove
on workpiece adsorption side
With auto switch
D-P3DWA
D-M9V
4 x M5 x 0.8 Thread depth 7.5
4 x M5 x 0.8 Thread depth 7.5
15 15
15
17
50
50
ø50
Rc1/8
(Workpiece adsorption port)
Rc1/8
(Workpiece release port)
Bumper
6.458
66
58
58
(4)
(9.8)
(26.5) (25.1)
6.4
6.4
4 x 29
Auto switch insert area
4 x 29
Auto switch insert area
6.8
74.2
A (Refer to the figure below.)
øB
øC
A
T
Symbol
Part number
A øB øC T
1
MHM-32D1-X6400 80.2 39
50
(6)
2
MHM-32D2-X6400 81.2
30
(7)
3
MHM-32D3-X6400 82.2 (8)
Bumper dimensions
Caution
¡Since a thin plate is used for the metal surface on the end, damage may occur when an impact load is applied due to contact with a workpiece. Be sure to
attach a bumper before use, and check and adjust operation so that no impact load is applied to the metal surface.
¡When operating an actuator with a small diameter and a short stroke at a high frequency, dew condensation (water droplets) may occur inside the piping
depending on the conditions.
Simply connecting the moisture control tube (IDK series) to the actuator will prevent dew condensation from occurring. For details, refer to the IDK series
in the WEB catalog.
3
Magnet Gripper
MHM-X6400