Datasheet

53
Series PF2D
Remote Type/Display Unit
PF2D300, 301
4-channel Flow Monitor (Remote type/Display unit)
PF2D200, 201
LED display/Red
Output (OUT1) display/Green
Output (OUT2) display/Red
UP button (
 button)
SET button ( button)
DOWN button (
 button)
Displays the measured flow rate, each setting condition, and error code.
Displays the output condition of OUT1. Illuminates when turned ON.
Displays the output condition of OUT2. Illuminates when turned ON.
Use to change the mode or to increase the set value.
Use this button to set the value or the set mode.
Use to change the mode or decrease the set value.
RESET button ( +

button)
If the UP and DOWN buttons are pressed simultaneously, the RESET function will activate.
In case of an emergency, please clear the display. The display of the accumulated flow will be
reset to zero.
q
w
e
r
t
y
LED display/Orange
Switch output display/Red
Unit display/Orange
Channel display/Red
UP button (
 button)
SET button
DOWN button (
 button)
Displays the measured flow rate, each setting condition, and error code.
Displays the output condition of OUT1 (CH1 to 4). Lights up when turned ON.
Displays the selected channel.
Use to change the mode or to increase the set value.
Use this button to set the value or the set mode.
Use to change the mode or decrease the set value.
Illuminates the selected unit. Use after putting the unit label other
than l/min, l.
q
w
e
r
t
y
u
OUT1
SET
CH
L/min
L
SMC FLOW SWITCH
SET
RESET
UNIT
q
w
t
y
q
e
y
t
w
r
e
r
u
Description