Datasheet

ManualsBrandsSMC ManualsAutomationCompact Manometer

F.R.L.

VEX

AMR

ITV

VBA

VE

VY1

PPA

Peak display

Bottom display

MPa

POWER

LIGHT

MPa

POWER

LIGHT

Pressure measurements can easily be taken any time, anywhere.

Compact Manometer

Series PPA

 Compact and lightweight

Portable type with a lightweight of only about 100 g

(unit 50 g, battery 50 g) can also be held in the palm of the hand.

 Long service life of 12 months continuous operation

One year of continuous operation is possible with 2 type AA batteries (3 V).

 Convenient hand strap for carrying

Keeping practical use in mind, the hand strap is a standard feature.

 Zero/span calibration is possible

Offset adjustment with the zero clear function, and span calibration with the trimmer

can be performed.

 Peak/Bottom hold function

With pressure being displayed, variations in supply pressure can be grasped instantly

with one touch switching of the display from peak value to bottom value.

 Auto power off function to save batteries

Power turns off automatically if not operated for more than 5 minutes.

 Case holder is available

The case holder is provided as an option to allow for situations where portability is not

required.

 Back light for easy viewing in dark locations

14-12-1

Summary of content (8 pages)

PAGE 1
Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. F.R.L. AV AU AF AR IR VEX AMR ITV IC VBA VE Compact and lightweight VY1 Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g) can also be held in the palm of the hand. G Back light for easy viewing in dark locations Long service life of 12 months continuous operation PPA AL One year of continuous operation is possible with 2 type AA batteries (3 V).
PAGE 2
Series PPA Pressure measurements can easily be taken any time, anywhere. Application Example Confirmation of air line source pressure Human reading error is eliminated by the ability to confirm line pressure on the digital display. It is also possible to check pulsation in the source pressure using the peak/bottom display funcion. Confirmation of regulator set pressure Setting a regulator can be performed more precisely than with a dial gauge by viewing the digital display while making the setting.
PAGE 3
Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions. Handling Operating Environment 1. The compact manometer can be used for measurement of air and non-corrosive gases. 1. Absolutely never use in an atmosphere where explosive gases are used. Please note that the accuracy of measurement for other fluids cannot be guaranteed. Furthermore, the construction is not explosion proof, and therefore, flammable gases should not be used.
PAGE 4
Compact Manometer Series PPA PPA100/101/102 How to Order PPA10 0 M Unit specifications Pressure specifications 0 –0.
PAGE 5
Series Compact Manometer Description of Operating Parts PPA Operation and Functions (PPA100 shown, Unit: MPa) Initial Setting Be certain to perform initial setting when using for the first time and after changing batteries, as the unit will indicate memory data error. 1. Confirmation of display “P” for peak display “b” for bottom display LCD • Present pressure display • Peak/bottom value display • Units display 1.
PAGE 6
Series PPA Operation and Functions (PPA100 shown, Unit: MPa) Unit Display Switching Peak/Bottom Display Note) This operation cannot be done for the type which does not have the unit switching function. Note) Since this is combined with power OFF operation, the button should be released at the point when “P” or “b” is displayed. 1. Press and hold the POWER and LIGHT buttons for 3 seconds or more. 1.When pressed continuously for 3 seconds or more, the unit on the LCD will flash. 2.
PAGE 7
Compact Manometer Series PPA Dimensions Connecting tube port 40 20 Accessory One-touch fitting F.R.L. AV PPA100 LOCK MODE(AUTO POWER OFF CANCEL) POWER AU LIGHT AF BATTERY 1.5 Vx2 LR6, R6P AX MADE IN JAPAN 180 AR X Refer to Note) LIGHT 110 POWER Body IR Span calibration + – – + VEX AMR Type AA dry batteries (2 pcs.) Note) Dimension X includes the One-touch fittng ø4 ø6 ø1/4" ITV IC 123 124 126 VBA (Front) VE (Back) VY1 20 G Option/Case holder Fitting port diameter M5 x 0.
PAGE 8
Series PPA Error Correction Maintenance When errors occur, they should be corrected as shown below. Display Entire display flashes Contents Corrective action Pressure being applied is above the rating. Operate within the rated pressure range. Memory data has probably been corrupted in some way. Perform auto zero adjustment. Battery voltage is low. Replace the batteries. 앬 Span calibration method Caution Do not touch the span calibration trimmer except when performing span calibration. 1.