Brochure

ManualsBrandsSMC ManualsActuator AccessoriesElectronic Pressure Switch

PS1000-R06L

MADE IN JAPAN

AIRCHECKER

Air Checker:

Electronic Pressure Switch

Applicable fluid: Air, Non-corrosive gas, Non-flammable gas

Series PS1000/1100/1200

New

RoHS

Compact/lightweight

electronic pressure switch

Addition of vacuum range (−100 to 0 kPa)

Easy adjustment of pressure setting trimmer

Positive pressure

adjustment range

–100 kPa

PS1200 (For vacuum)

0 kPa –0.1 MPa

0 MPa

PS1000/1100

0.45 MPa/0.4 MPa

Easy mounting

Plug-in reducer port for

One-touch fittings

2-wire type

Applicable to either NPN or PNP output

High visibility

A large LED display for an easily

visible switch

Switch output

Max. operating pressure

Set pressure range

Fluid

Indicator light

Temperature characteristics

Repeatability

Hysteresis

Load voltage

Load current

Leakage current

Internal voltage drop

Operating temperature range

Insulation resistance

Withstand voltage

Weight

Port size

Enclosure

Lead wire

Note)

Wetted parts material

Standards

Model

PS1200

500 kPa

–100 to 0 kPa

10% F.S. or less

PS1000

Present pres. ≥ Setting pres.: ON

–0.1 to 0.45 MPa

PS1100

–0.1 to 0.4 MPa

Air/Non-corrossive gas/Non-flammable gas

ON: When red LED turns on

±3% F.S.

±1% F.S.

12 to 24 VDC ±10%, Ripple (p-p) 10% or less

5 to 40 mA

1 mA or less

5 V or less

0 to 60°C (No condensation)

2 MΩ or more (500 VDC measured via megohmmeter) between terminals and housing

1000 VAC (in 50/60 Hz) for 1 minute between terminals and housing

5 g (Excluding lead wire)

R06: ø6 reducer, R07: 1/4" reducer

IP40

Pressured sensor part: Silicon, Body part: PBT, O-ring: HNBR

CE (Option), RoHS

Specifications

1 MPa

4% F.S. or less

Grommet oil-resistant vinyl cabtire code 2 cores, ø2.55, 3 m,

Cross section: 0.18 mm

, Insulator O.D.: 0.96 mm

Note) For wiring, refer to the Operation Manual on our website, http://www.smc.eu

Present pres. ≤ Setting pres.: ON

Find the operation manual on our website www.smc.eu for

specific product precautions.

PS1000

For Positive

Pressure

PS1200

For Vacuum

PS1100

For Vacuum,

Residual Pressure

NewNew

220°

Vacuum

adjustment

range

CAT.EUS100-23B-UK

Summary of content (2 pages)

PAGE 1
Air Checker: Electronic Pressure Switch New RoHS Applicable fluid: Air, Non-corrosive gas, Non-flammable gas PS1000 New For Positive Pressure For Vacuum, PS1100 Residual PS1200 For Vacuum Pressure Compact/lightweight electronic pressure switch Addition of vacuum range (−100 to 0 kPa) New Easy adjustment of pressure setting trimmer 220° Positive pressure adjustment range 0 MPa 10 Vacuum adjustment range 30 –100 kPa 0 kPa –0.
PAGE 2
RoHS How to Order PS 10 00 R06 L Q Output specifications 10 For positive pressure 11 For vacuum and residual pressure 12 For vacuum Lead wire length L 3m Piping specifications R06 R07 ø6 reducer 1/4" reducer Switch Specifications PS1000/PS1100 PS1200 0 0.2 kPa MPa 0.4 Set pressure 0 –0.1 PS1000 ON OFF –50 Set pressure –100 t t The switch turns ON when the set pressure is reached or exceeded. PS1100 ON OFF The switch turns ON when at the set pressure or below.