User guide

Interface Commands

6-85

specify the key length, and use the key command to

configure at least one key.

• If WEP is enabled, all wireless clients must be configured

with the same shared keys to communicate with the access

point.

• The encryption length specified in the encryption

command and the key command must match.

• The encryption index, length and type configured in the

access point must match those configured in the clients.

Example

Related Commands

authentication (page 6-82)

encryption (page 6-83)

transmit-key

This command sets the index of the key to be used for encrypting

data frames broadcast or multicast from the access point to

wireless clients.

Syntax

transmit-key <index>

index - Key index. (Range: 1-4)

Default Setting

Command Mode

Interface Configuration (Wireless)

SMC-AP(if-wireless g)#key 1 128 hex 1234512345529

SMC-AP(if-wireless g)#key 2 128 ascii asdeipadjsipd

SMC-AP(if-wireless g)#key 3 128 hex 1234512345123

SMC-AP(if-wireless g)#