User guide

1-1
Chapter 1
Introduction
SMC’s EliteConnect 2.4GHz 802.11g Wireless Access Point
(SMC2552W-G) is an IEEE 802.11b/g access point that provides
transparent, wireless high-speed data communications between
the wired LAN and fixed, portable or mobile devices equipped
with a 802.11b, or 802.11g wireless adapter.
This solution offers fast, reliable wireless connectivity with
considerable cost savings over wired LANs (which include
long-term maintenance overhead for cabling). Using 802.11b and
802.11g technology, this access point can easily replace a
10 Mbps Ethernet connection or seamlessly integrate into a
10/100 Mbps Ethernet LAN.
In addition, the access point offers full network management
capabilities through an easy to configure web interface, a
command line interface for initial configuration and
troubleshooting, and support for Simple Network Management
tools, such as SMC’s EliteView.
Radio Characteristics – The IEEE 802.11g standard uses a
radio modulation technique known as Orthogonal Frequency
Division Multiplexing (OFDM), and a shared collision domain
(CSMA/CA). It operates at 2.4 GHz for connections to 802.11g
clients.
IEEE 802.11g includes backward compatibility with the IEEE
802.11b standard. IEEE 802.11b also operates at 2.4 GHz, but
uses Direct Sequence Spread Spectrum (DSSS) modulation
technology to achieve a communication rate of up to 11 Mbps.