User guide

Interface Commands
6-95
show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless <g>
• g - 802.11g radio interface.
Command Mode
Exec
Example
SMC-AP#show interface wireless g
Wireless Interface Information
=========================================================
----------------Identification---------------------------
Description :
Enterprise 802.11g Access Point
SSID : SMC-AP
Channel : 0 (AUTO)
Status : Disable
----------------802.11 Parameters------------------------
Transmit Power : HALF (10 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 32 stations
----------------Security---------------------------------
SSID Broadcast : DISABLED
Multicast cipher : TKIP
Unicast cipher : WEP
WPA clients : SUPPORTED
Encryption : DISABLED
Default Transmit Key : 1
Static Keys :
Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : OPEN
=========================================================
SMC-AP#