User guide

Advanced Configuration
5-5
CLI Commands for System Identification – Enter the global
configuration mode, and use the system name command to
specify a new system name. Enter the wireless configuration
mode (11g), and use the ssid command to set the service set
identifier. Then return to the Exec mode, and use the show
system command to display the changes to the system
identification settings.
SMC AP#configure 6-11
SMC-AP(config)#system name R&D 6-20
SMC-AP(config)#interface wireless g 6-68
SMC-AP(if-wireless g)#ssid r&d 6-78
SMC-AP(if-wireless g)#end 6-12
SMC-AP#show system 6-33
System Information
===================================================
Serial Number : A324003220
System Up time : 0 days, 0 hours, 32 minutes, 51 seconds
System Name : r&d
System Location :
System Contact : Contact
System Country Code : US - UNITED STATES
MAC Address : 00-30-F1-91-91-5B
IP Address : 192.168.2.51
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.250
VLAN State : DISABLED
Native VLAN ID : 1
IAPP State : ENABLED
DHCP Client : ENABLED
HTTP Server : ENABLED
HTTP Server Port : 80
Slot Status : Band(g)
Software Version : v2.0.22
===================================================
SMC-AP#