Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
6
Handset Volume Set Handset volume from 0~15 (max.) for you to hear.
Speaker Volume Set Speaker phone volume from 0~15 (max.) for you to hear.
Handset Gain Set Handset Gain from 0~15 (max.) for the other site to hear.
Volume & Gain
Speaker Gain Set Speaker phone Gain from 0~15 (max.) for the other site to
hear.
Ringer Volume Ringer volume setting from 0~15 (max.). Ringer
General Ringer Ringer tone selection from 1~4.
Auto Dial Set Auto Dial time from 1~5 seconds.
Call Waiting Set enable to be informed there is a new incoming call. User can set the function to
disable.
Direct Dial Set enable to be able to dial the phone numbers in Phone Book by pressing
“**+position”.
2.3.4 Network
Name Description
IP Type
Fixed IP: self configure the IP address.
DHCP: to get IP address through DHCP.
PPPoE: to get IP address through PPPoE.
Set Fixed IP
IP Address: the IP address of the IP phone.
Subnet Mask: configure subnet mask.
Default Gateway: the gateway address
WAN Setup
Set PPPoE
User Name: user name of PPPoE
Password: password of PPPoE
Bridge Set LAN as bridging mode LAN Setup
NAT Set LAN as NAT mode
Primary DNS First DNS address DNS
Secondary DNS Second DNS address
Activation Activate or disable the VLAN.
VID Set VID from 2 to 4094.
Priority Set the priority from 0 to 7.
VLAN
CFI 0~1