Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
14
3.4.4 Ringer Settings
You can select the melody for the incoming calls.
Ring Tone By Caller ID Matching Digits: Enter a digit for the number of caller ID digits. If the total digit of the
phone number is larger or equal to the digit, the ringer type hunts for the phone number that matches digits at the
end, and the melody of that phone number will ring. If the total digit of the phone number is smaller than the digit,
it will hunt for the exact match phone number and ring the ringer type of the phone number.
Note: The order of the phone number in the Phone Book page matters the hunting sequential.
General Ringer Type: Select general ring tone for the incoming calls.
When you finished the setting, click Submit. Go to the Save Changes page and click Save to reflect the
changes.
3.4.5 DND Settings
You can setup the DND (Do-not-disturb) Setting to keep the phone silent. You can choose DND Always or DND
Period.
DND Always: All incoming call will be blocked until you disable this feature.