Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
17
3.4.7 Call Waiting Settings
If the user doesn’t want to be informed there is a new incoming call, the user can set the function to off. When
you have finished the settings, click Submit. Go to the Save Change page and click Save to reflect the changes.
3.4.8 Soft-key Settings
The SMC IP Phone supports soft-key settings for voice messages. You can press SPEAKER, and then VOICE
MSG on the IP phone to dial out the entered number in order to get into the voice mail service.
Voice mail key: enter a serial of number for listening to the voice messages.
When you have finished the settings, click Submit. Go to the Save Change page and click Save to reflect the
changes.
Direct Phone Book Dial: Click On to be able to dial the phone numbers in Phone Book by pressing
“**+position”.
3.4.9 Hot Line Settings
Hot line setting is a special line for the IP Phone. When you enable the function, the phone will directly dial out
the number once the phone is picked up.