Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
27
Proxy Server: you need to input the Proxy Server get from your ISP or Administrator.
Outbound Proxy: you need to input the Outbound Proxy get from your ISP or Administrator. If your ISP does not
provide the information, then you can skip this item.
Subscribe for MWI: you can click ON for the IP phone to ask for MWI periodically.
You can see the Register Status in the Status item. If the item shows “Registered”, then your VoIP Phone is
registered to the ISP or Network, you can make a phone call directly.
If you have more than one SIP account, you can follow the steps to register to the other ISP.
When you have finished the settings, click Submit. Go to the Save Change page and click Save to reflect the
changes.
3.6.2 Port Settings
You can setup the SIP and RTP port numbers in this page. Each ISP provider will have different SIP/RTP port
settings. When you have finished the settings, click Submit. Go to the Save Change page and click Save to
reflect the changes.
3.6.3 Codec Settings
You can setup the Codec priority, RTP packet length, and VAD function in this page. You need to follow the ISP
or Administrator suggestions to setup these items. When you have finished the settings, click Submit. Go to the
Save Change page and click Save to reflect the changes.