Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
29
3.6.6 RPort Function
You can setup the RPort On (Enable/Off (Disable) in this page. To change this setting, please follow your ISP
information. When you have finished the settings, click Submit. Go to the Save Change page and click Save to
reflect the changes.
3.6.7 Other Settings
You can setup the Hold by RFC, Voice/SIP QoS and SIP Expire Time in this page. To change these settings
please follow your ISP information. The QoS setting is to set the voice packets’ priority. The Voice QoS is to set
the priority of RTP packets and SIP QoS field is for SIP signaling message priority. If you set the value higher
than 0, then the voice packets will get the higher priority to the Internet. Note that the QoS function still needs to
cooperate with the other Internet devices you connect to. When you have finished the settings, click Submit. Go
to the Save Change page and click Save to reflect the changes.