Operation Manual

1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
32
ICMP Not Echo: setup the ICMP echo Enable/Disable. This function can disable echo when someone pings this
device, it can avoid a hacker trying to attack the device.
Send Anonymous CID: click Yes for the IP phone not to send the phones caller ID out.
Send Flash Event: click DTMF EVENT or SIP INFO for the flash event.
PPPoE Retry Period: Type the time in second for PPPoE to redial, if connection is failed.
System Log Server: Type a server’s IP address for saving system log. Syslog is a standard for forwarding log
messages in an IP network and is typically used for management and debugging. It is supported by wide variety
of devices and receivers across multiple platform. For technical details, refer to RFC3164.
System Log Type: Select types of log for saving. The phone offers different debugging levels, each levels
contains different sets of debugging messages to send.
When you have finished the settings, click Submit. Go to the Save Change page and click Save to reflect the
changes.
3.9 System Auth
In System Authority, you can change password of the current user.
3.10 Save Changes
In Save Change, you can save the changes you have done. If you want to use new settings in the VoIP Phone,
you have to click Save. After you click Save, the VoIP Phone will automatically restart and the new settings will
take effect.