Datasheet

ManualsBrandsSMC ManualsAutomationFluoroplymer Tubing, 4mm, 6mm, Polytetrafluoroethylene Resin, White Transparent, 10m

Series TD

TID

Soft Fluoropolymer Tubing

CAT.EUS50-29A-UK

 Applications

• Food • Semiconductor

• Life Science • Automobile

• Machine Tool

 Flexibility:

Approx.

% improved

∗ SMC comparison (with fluoropolymer tubing TL/TIL series)

Available in

sizes

 Metric size:

ø4

ø12

 Inch size:

1/8"

1/2"

(

ø3.18

ø12.7

)

Note) Varies depending on the operating pressure.

See the maximum operating pressure graph

on page 1 and 2.

260

Operating temperature

Note)



MAX.

260



Conforms to Food

Sanitation Law

• Passed Japan’s Food Sanitation Law test from 1959.

• Passed the United States FDA (Food and Drug Administration) elution test 177-1550.

PTFE

Material



Denatured

PTFE

Summary of content (8 pages)

PAGE 1
CAT.EUS50-29A-UK Soft Fluoropolymer Tubing Flexibility: Approx. ∗ SMC comparison (with fluoropolymer tubing TL/TIL series) 20 % improved Applications • Food • Semiconductor • Life Science • Automobile • Machine Tool  Conforms to Food Sanitation Law • Passed Japan’s Food Sanitation Law test from 1959. • Passed the United States FDA (Food and Drug Administration) elution test 177-1550. Operating temperature Note) Material  Denatured  MAX.
PAGE 2
Soft Fluoropolymer Tubing Metric Size Series TD Model/Specifications Size Model Tubing O.D. (mm) Tubing I.D. (mm) Metric size TD0425 TD0604 TD0806 TD1075 TD1209 4 2.5 10 m 20 m Roll   Applicable fittings Fixed end 2R Bend the tube into the U-form at a temperature of 20°C. Fix one end and close loop gradually. Measure 2R when the deformed ratio of the tube diameter at bending reaches 5%. 1.6 0.9 0.45 0.23 15 8 Max. operating pressure (MPa) 1.
PAGE 3
Soft Fluoropolymer Tubing Inch Size Series TID Model/Specifications Inch size Size Model TID01 TID05 TID07 TID11 TID13 Tubing O.D. inch mm 1/8" 3.18 Tubing I.D. inch 0.086" 3/16" 4.75 0.124" (1/8") 1/4" 6.35 0.156" (5/32") 3/8" 9.53 0.25" (1/4") 1/2" 12.7 0.374" (3/8") mm 8m 16 m 2.18 3.15 3.95 6.33 9.5 Roll How to measure the minimum bending radius Color Fluid Note 1) Applicable fittings Note 2) 20°C 100°C 200°C 260°C Recommended radius Min.
PAGE 4
Applicable Fluid List Chemical resistance of Fluoropolymer denatured PTFE material Chemicals in the list below are chemically inert Note) to denatured PTFE material. Possible physical effects may occur such as penetration and swelling due to temperature, pressure and chemical concentration. To use modified PTFE tube in a chemical environment, tests should be performed with the same environment to ensure no problem occurs with operating environment.
PAGE 5
Series TD/TID Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution," "Warning" or "Danger." To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life.
PAGE 6
Series TD/TID Tubing Precautions Be sure to read this before handling. Selection Warning Air Supply Warning 1. Confirm the specifications. Products represented in this catalogue are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc., beyond the range of specifications, as this can cause damage or malfunction. (Refer to the specifications.) 2.
PAGE 7
PAGE 8
EUROPEAN SUBSIDIARIES: Austria SMC Pneumatik GmbH (Austria). Girakstrasse 8, A-2100 Korneuburg Phone: +43 2262-62280, Fax: +43 2262-62285 E-mail: office@smc.at http://www.smc.at France SMC Pneumatique, S.A. 1, Boulevard de Strasbourg, Parc Gustave Eiffel Bussy Saint Georges F-77607 Marne La Vallee Cedex 3 Phone: +33 (0)1-6476 1000, Fax: +33 (0)1-6476 1010 E-mail: contact@smc-france.fr http://www.smc-france.