Specifications

CLI Management Guide
TigerAccess™ EE
160 SMC7824M/VSW
7.4.2.6 Standard of the First Alarm
It is possible for users to configure standard when alarm is first occurred. User can select
the first point when object is more than threshold, or the first point when object is less
than threshold, or the first point when object is more than threshold or less than threshold.
To configure the first RMON alarm to occur when object is less than lower bound of
threshold first, use the following command.
Command Mode Description
startup-type falling RMON
Configures the first RMON Alarm to occur when object
is less than lower bound of threshold first.
To configure the first alarm to occur when object is firstly more than upper bound of
threshold, use the following command.
Command Mode Description
startup-type rising RMON
Configures the first Alarm to occur when object is firstly
more than upper bound of threshold.
To configure the first alarm to occur when object is firstly more than threshold or less than
threshold, use the following command.
Command Mode Description
startup-type rising-and-falling RMON
Configures the first Alarm to occur when object is firstly
more than threshold or less than threshold.
7.4.2.7 Interval of Sample Inquiry
The interval of sample inquiry means time interval to compare selected sample data with
upper bound of threshold or lower bound of threshold in terns of seconds.
To configure interval of sample inquiry for RMON alarm, use the following command.
Command Mode Description
sample-interval <0-65535> RMON
Configures interval of sample inquiry.
(unit: second)
7.4.2.8 Activating RMON Alarm
After finishing all configurations, you need to activate RMON alarm. To activate RMON
alarm, use the following command.
Command Mode Description
active RMON Activates RMON alarm.