Wear Resistant Tubing 1/ 3 Abrasion: Approx. (Compared with SMC polyurethane tubing TU series) Maximum abrasion (mm) Description After 10 million cycles Wear resistant tubing TUZ series 0.16 Polyurethane tubing TU series 0.46 Note) Comparison based on the SMC's specific testing condition 6-colour variations Black White Red Blue Yellow Green 5-size variations Tubing O.D.: ø4 Series TUZ ø6 ø8 ø10 ø12 CAT.
Wear Resistant Tubing Series TUZ Model — 20 m roll — 100 m roll Model Tubing O.D. (mm) TUZ0425 TUZ0604 TUZ0805 TUZ1065 TUZ1208 4 6 8 10 12 Tubing I.D. (mm) 2.5 4 5 6.5 8 Black (B) White (W) Red (R) Blue (BU) Yellow (Y) Green (G) Specifications Fluid Air One-touch fittings KQ/KJ series, Insert fittings KF series, Stainless steel 316 insert fittings KFG series, Miniature fittings M/MS series (hose nipple type) Applicable fittings Max. operating pressure 20°C 0.8 MPa 60°C 0.
Wear Resistant Tubing Series TUZ Reference Data: Abrasion due to Flexible Protection Tube Test Conditions Test tube L TUZ0604, TU0604 Quantity of tube tested 5 pcs. for each Operating speed 1500 mm/sec Operating frequency 90 c.p.m Stroke L 500 mm Bending radius R Flexible protection tube R 28 mm Material of flexible protection tube Special engineering plastic Tube tie Not used Test Results Flexible protection tube Model Maximum abrasion after 10 million cycles (mm) TUZ0604 TU0604 0.
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC), Japan Industrial Standards (JIS)∗1) and other safety regulations∗2). ∗ 1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Safety Instructions Caution The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch.
Series TUZ Specific Product Precautions Be sure to read before handling. Refer to back pages 1 and 2 for Safety Instructions, “Handling Precautions for SMC Products” (M-E03-3) for Fittings and Tubing Precautions. Selection Warning Piping Caution 1. Confirm the specifications. Products represented in this catalogue are designed only for use with compressed air system applications (including vacuum).
EUROPEAN SUBSIDIARIES: Austria SMC Pneumatik GmbH (Austria). Girakstrasse 8, A-2100 Korneuburg Phone: +43 2262-622800, Fax: +43 2262-62285 E-mail: office@smc.at http://www.smc.at France SMC Pneumatique, S.A. 1, Boulevard de Strasbourg, Parc Gustave Eiffel Bussy Saint Georges F-77607 Marne La Vallee Cedex 3 Phone: +33 (0)1-6476 1000, Fax: +33 (0)1-6476 1010 E-mail: contact@smc-france.fr http://www.smc-france.