Brochure

ManualsBrandsSMC ManualsAccessoriesSpacer with Bracket

Table Of Contents

AC20D AC40D

Nil

Note 11)

Note 12)

Pressure unit

Name plate and pressure gauge in imperial units: MPa

Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F

Digital pressure switch: With unit conversion function

Semi-

standard

Description

Symbol

30 4020

Body size

Note 13) Note 13)Note 13)

Note 14) Note 14)Note 14)

Air

–5 to 60°C (with no freezing)

1.5 MPa

1.0 MPa

0.05 MPa

0.05 to 0.85 MPa

Set pressure + 0.05 MPa [at relief flow rate of 0.1

l/min (ANR)]

AF: 5 µm, AFM: 0.3 µm (99.9% filtered particle size)

Max. 1.0 mg/m

(ANR) (≈ 0.8 ppm)

Note 4) Note 5)

Polycarbonate

Relieving type

330

0.74

150

Semi-standard

0.57

800

Standard

1.38

800

1.43

Model

Component

Port size

Pressure gauge port size

Note 1)

Fluid

Ambient and fluid temperature

Note 2)

Proof pressure

Maximum operating pressure

Minimum operating pressure

Set pressure range

Relief pressure

Nominal filtration rating

Rated flow (l/min (ANR))

Note 3)

Outlet side oil mist concentration

Bowl material

Bowl guard

Regulator construction

Mass (kg)

Filter regulator

Mist separator

AC40D-06

AW40-06

AFM40-06

3/4

AC40D

AW40

AFM40

1/4, 3/8, 1/2

AC30D

AW30

AFM30

1/4, 3/8

AC20D

AW20

AFM20

1/8, 1/4

1/8 1/4

Standard Specifications

Note 1) Pressure gauge connection threads are not available for F.R.L. unit with a square embedded type pressure gauge or with a digital pressure switch (AC20D to AC40D).

Note 2) –5 to 50°C for the products with the digital pressure switch

Note 3) Conditions: Mist separator inlet pressure: 0.5 MPa; The rated flow varies depending on the inlet pressure. Keep the air flow within the rated flow to prevent an outflow of

lubricant to the outlet side.

Note 4) When the compressor oil mist discharge concentration is 30 mg/m

(ANR).

Note 5) Bowl O-ring and other O-rings are slightly lubricated.

Note 1) Drain guide is NPT1/8 (applicable to the AC20D)

and NPT1/4 (applicable to the AC30D to AC40D).

The auto drain port comes with ø3/8" one-touch

fitting (applicable to the AC30D to AC40D).

Note 2) Drain guide is G1/8 (applicable to the AC20D)

and G1/4 (applicable to the AC30D to AC40D).

Note 3) Option G, M are not assembled and supplied

loose at the time of shipment.

Note 4) The bracket position varies depending on the

pressure switch mounting.

Note 10) Metal bowl: The combination of 2 and 8 is not

possible.

Note 11) For thread type: NPT. This product is for

overseas use only according to the new

Measurement Law. (The SI unit type is provided

for use in Japan.) The digital pressure switch will

be equipped with the unit conversion function,

setting to psi initially.

MPa and psi are shown together on the pressure

unit.

Note 12) For options: E1, E2, E3, E4. This product is for

overseas use only according to the new

Measurement Law. (The SI unit is provided for

use in Japan.)

Note 13)

쑗

: For thread type: NPT only

Note 14)

탊

: Select with options: E1, E2, E3, E4.

Note 5) The regulator is equipped with a backflow function

in this configuration. Additionally, for safety

purposes, please check that the pressure in the

outlet side is turned to the atmospheric pressure

once the pressure in the outlet side is exhausted,

by using a pressure gauge, etc.

Note 6) The only difference from the standard

specifications is the adjusting spring for the

regulator. It does not restrict the setting of 0.2

MPa or more. When the pressure gauge is

attached, a 0.2 MPa pressure gauge will be fitted.

Note 7) Refer to Chemical Data on page 287 when

selecting a case material.

Note 8) Float type auto drain: The combination of C and D

is not possible.

Note 9) Without a valve function

319

Air Combination

Series AC20D to AC40D

AF쏔

AW쏔

A쏔G

AF800

AF900