Datasheet

Component Parts
Description Material Quantity
PC
Resin PBT
Sintered resin
HNBR
Resin PBT
1
2
1
2
1
Case
Cover
Element
Seal
Bracket
No.
1
2
3
4
5
Replacement Element Part No.
Applicable filter model Element size Set description
ø12 x ø8 x L20
ø16 x ø12 x L25
Spare element: 10 pcs.
Spare element: 10 pcs.
ZFC5
ZFC7
Part no.
ZFC-EL-3
ZFC-EL-4
q
w
e
r
t
One-touch fittings
Unlocked state Locked state
Rotating
Cover
Case
Element
Protrusion on the cover
Product no. display
Construction
Element Replacement
Procedure 2
Procedure 7
Procedure 6
Procedure 5
Procedure 3
Procedure 4
Procedure
IN
OUT
1. Stop operation and reduce the filter’s internal pressure to atmosphere.
2. Slide the lock mechanism in the direction of the arrow to release the lock.
3. Rotate the cover counterclockwise at least 90 degrees.
4. Pull the cover out of the case to remove the element. Remove dust and other debris remaining inside the case by blowing it out with
air, etc. (Also, confirm that the O-ring is not damaged.)
5. Install a new element on cover and insert it into the case.
6. Align the raised part of the cover with the model no. display of the body, and push the cover to the end of the body and rotate it
clockwise until it stops.
7. Set the lock mechanism and check that the cover is locked completely.
Series ZFC
3