Datasheet

Maintenance
Warning
1. Perform maintenance inspection according
to the procedures indicated in the operation
manual.
If handled improperly, malfunction and damage of machinery
or equipment may occur.
2. Maintenance work
If handled improperly, compressed air can be dangerous.
Assembly, handling, repair and element replacement of
pneumatic systems should be performed by a knowledgeable
and experienced person.
3. Drain flushing
Remove drainage regularly from the water separator, air
filters, vacuum drain separator, etc.
4. Removal of equipment, and supply/exhaust
of compressed air
When components are removed, first confirm that measures
are in place to prevent workpieces from dropping, run-away
equipment, etc. Then, cut off the supply pressure and electric
power, and exhaust all compressed air from the system using
the residual pressure release function.
When machinery is restarted after remounting or replacement,
first confirm that measures are in place to prevent lurching of
actuators. Then, confirm that the equipment is operating
normally.
5. Clean suction filters and silencers on a regu-
lar basis.
The performance of an ejector will deteriorate due to clogged
filters and silencers. High flow filters should be used,
especially in dusty locations.
Vacuum Equipment
Precautions 3
Be sure to read this before handling.
86