Datasheet

Application Material
NBR Transfer of general work, Corrugated board, Veneer plate, Iron plate and others
Silicone rubber Semiconductor, Removing from die-casting, Thin work, Food processor
Urethane rubber Corrugated board, Iron plate, Veneer plate
FKM Chemical work
Conductive NBR General work of semiconductor (Static electricity resistance)
Conductive silicone rubber Semiconductor (Static electricity)
Application Pad shape
Flat
Flat with rib
Deep
Bellows
Oval
Application Pad shape
Ball joint
Long stroke buffer
Large
Conductive
Pad Type
 Vacuum Pad Type
• Vacuum pads are available in flat, deep, bellows, thin flat, with rib, and oval types, etc. Select the optimal shape in
accordance with the workpiece and operating environment. Please contact SMC for shapes not included in this catalogue.
To be used when adsorption surface of
workpiece is flat and not deformed.
To be used when workpiece is likely to
deform or in the case of releasing work
certainly.
To be used when there is not enough
space to install buffer or adsorption
surface of workpiece is slanted.
To be used when workpiece is curved
shape.
To be used when workpiece has limited
adsorption surface or long in length and
work is required to locate precisely.
To be used when workpiece is heavy weight.
As one of the countermeasures against
the static electricity, rubber material with
reduced resistance is used.
For antistatic measures
To be used when adsorption surface of
workpiece is not horizontal.
To be used when workpiece height is not
even or cushioning toward workpiece is
required.
 Vacuum Pad Material
• It is necessary to determine vacuum pad materials carefully taking into account the workpiece shape, adaptability in the
operating environment, effect after being adsorbed, electrical conductivity, etc.
• Based on the work transfer example for each material, select after confirming the characteristics (adaptability) of rubber.
Vacuum Pad/Example of Work Transfer
Material
Model Selection
Front matter 14