Datasheet

ManualsBrandsSMC ManualsAutomationVacuum Sucker

3.9-1

Vacuum Entry

Series

ZPT

Series

ZPR

Series

ZPY

Mounting

Series Without Buffer

With buffer

Non-rotating

Stroke ø2 to ø8: 6, 10, 15, 25mm

ø10 to ø32: 10, 20, 30, 40, 50mm

ø40, ø50: 10, 20, 30, 50mm

Male

thread

Female

thread

One-touch

fitting

One-touch

fitting

Barb

fitting

Barb

fitting

Flat style (U) Flat with ribs (C) Deep style (D) Bellows style (B)

(Common)

Male

thread

Female

thread

Male

thread

Female

thread

Vacuum Entry

Mounting

Female

thread

One-touch

fitting

Barb

fitting

Buffer

body

Barb

fitting

Buffer

body

One-touch

fitting

Buffer

body

Buffer

body

Buffer

body

Vertical

Vacuum Entry

Lateral Vacuum Entry

With One-touch fitting

Lateral Vacuum Entry

With barb fitting

P.3.9-28 to

P.3.9-43

P.3.9-44 to

P.3.9-57

P.3.9-2 to

P.3.9-27

VAC

Female

thread

Barb

fitting

One-touch

fitting

One-touch fitting

Barb fitting

VAC

Pad style

(Compatible with all models)

Pad diameter

(ø 2 to ø 125)

Pad diameter

ø2 to ø125 (Option: ø150 to ø250)

Refer to technical data on page P.3.0-7 to P.3.0-14 for the calculation of lift force and response time.

Pad material

Selection of Pad

q Long stroke w Oval pad e Ball joint pad r Large size pad

Option

NBR (Black), Silicon rubber (White), Urethane rubber (Brown), Fluorine rubber (Black with green mark),

Conductive NBR (Black with one white mark), Conductive silicon rubber (Black with two white marks)

Flat

Flat with ribs

Deep

Bellows

ø50ø40ø32ø25ø20ø16ø13ø10ø8ø6ø4ø2

————

—

Vacuum Pad

Series ZP

Item

Material

NBR

Silicon rubber

Urethane rubber

Fluorine rubber

Conductive NBR

Conductive silicon rubber

Durometer

HS (±5°)

50°

40°

60°

50°

Operating

press. range (°C)

0 to 120

–30 to 200

0 to 60

0 to 250

0 to 100

–10 to 200

Oil resistance

(gasoline)

Oil resistance

(benzol)

Alkaline

resistance

Acid

resistance

Weatherability

Ozone

resistance

Abrasion

resistance

Water

resistance

Solvents

benzene

toluene

The above table covers only general characteristics of subject rubber materials.

Pad materials used by SMC pass JIS standards; however the actual performance depends on operating conditions.

Pad material and Characteristics

: Little or no influence : Can be used depending on conditions X: Not suitable

ZCU

CYV

Vacuum

PAGE 1
Vacuum Pad Series ZP With buffer Series Without Buffer Vacuum Entry Mounting P.3.9-2 to P.3.9-27 Series ZPT Vertical Vacuum Entry P.3.9-28 to P.3.9-43 Series ZPR Lateral Vacuum Entry With One-touch fitting P.3.9-44 to P.3.
PAGE 2
Series ZPT ZPT Vertical Vacuum Entry/without Buffer Specifications Vacuum entry Direction Connection ø2 to ø8 Thread ø10 to ø16 dia. ø20 to ø32 ø40, 50 Mounting Vertical Female thread M4, M5 M5, M6, Rc(PT) 1 8 M5, M6, M8, Rc(PT) 1 8 M6, M8, Rc(PT)1 8 Use connection for vacuum entry Male thread M5, M6 M5, M6 M6, M8 X 1 M6, M8 X 1 Pad Style Deep Flat Flat with ribs Bellows 2, 4, 6, 8, 6, 8, 10, 13, 16, 20, 10, 16, 25, 40 10,13, 16, 20, 10, 13, 16, 20, Pad dia.
PAGE 3
Vertical Vacuum Entry without Buffer Series ZPT How to Order Series ZPT without buffer ZPT 02 U N A5 Vacuum entry Pad dia. (mm) Thread Symbol Thread dia. M5 A5 M6 A6 A8 M8 X 1 B4 M4 B5 M5 B6 M6 B8 M8 B01 Rc(PT)1/8 Male thread ø2 ø4 ø6 ø8 ø10 ø13 ø16 ø20 ø25 ø32 ø40 ø50 Pad style Female thread 02 04 06 08 10 13 16 20 25 32 40 50 (Refer to Tableq for applications.
PAGE 4
Series ZPT Pad Style Flat/Flat with Ribs/Deep Mounting Use Connection for Vacuum Entry Connection Male Thread Vacuum Entry Vertical Pad Diameters ø2, ø4, ø6, ø8 Pad Diameters ø20, ø25, ø32 Flat style Deep style: ZPT25D only Flat style Flat style Model ZPT02U ZPT04U ZPT06U ZPT08U øA øB øC 2 4 6 8 D 2.6 1.2 4.8 1.6 7 2.5 9 3 H: M5 E G 19 7 D Flat style/Flat with ribs H: M6 E G 4 20 8 Y Model 0.8 1 øA øB D ZPT20 U C 20 23 ZPT25 U C 25 28 ZPT32 U C 32 35 14.
PAGE 5
Vertical Vacuum Entry without Buffer Series ZPT Pad Style Bellows Mounting Use Connection for Vacuum Entry Connection Male Thread Vacuum Entry Vertical Pad Diameters ø6, ø8 Pad Diameters ø20, ø25, ø32 ZX ZR ZM ZY ZH ZU ZL ZF Model ZPT06B ZPT08B øA øB øC 6 8 D H: M5 E G 7 2.5 3 9 20 7 H: M6 øK øL Y E G 3.3 9.1 4 4 21 8 4.7 10.1 D Model ZPT20B ZPT25B ZPT32B H: M6 H: M8 X 1 øK øC E F G I øC E F G I 20 22 23.5 28.5 54.5 33.5 49.5 12.4 25 27 24 3 29 25 55 8 3.5 34 15 50 12 15.6 34 60 39 55 18.
PAGE 6
ZPT Series Pad Style Flat/Flat with Ribs/Deep Mounting Use Connection for Vacuum Entry Connection Female Thread Vacuum Entry Vertical Pad Diameters ø2, ø4, ø6, ø8 Pad Diameters ø20, ø25, ø32 Flat style/Flat with ribs Flat style Model ZTP02U ZTP04U ZTP06U ZTP08U øA 2 4 6 8 øB 2.6 4.8 7 9 C 1.2 1.6 F Y M4 2.5 Model 0.8 M5 1 øA øB ZPT20 U C 20 23 ZPT25 U C 25 28 ZPT32 U C 32 35 14.5 Weight Table Deep style Weight table for female thread: Refer to p.3.9-2.
PAGE 7
Vertical Vacuum Entry without Buffer Series ZPT Pad Style Bellows Mounting Use Connection for Vacuum Entry Connection Female Thread Vacuum Entry Vertical Pad Diameters ø6, ø8 Pad Diameters ø20, ø25, ø32 ZX ZR ZM ZY ZH ZU ZL Model ZPT06B ZPT08B øA 6 8 øB 7 9 øC 2.5 F M4 M5 øK 3.3 4.7 øL 9.1 10.1 Y 4 F: M5 D E G ZPT20B 20 22 23.5 32.5 ZPT25B 25 27 24 5 33 8 ZPT32B 32 34 29 38 Model øA øB øC F: M6 D E G 32.5 6 33 8 38 F: M8 F: Rc(PT) 1 8 øK D E G D E G 38.5 38.5 12.4 8 39 12 6.2 39 12 15.
PAGE 8
Series ZPT ZPT Vertical Vacuum Entry with Buffer Specifications Vacuum entry direction Connection Female thread M3 M5 Vertical Barb fitting ø4 Nylon tube ø4 Urethane tube One-touch fitting ø4 tube ø6 tube ø10 to ø32 M5 ø6 Nylon tube ø6 Urethane tube ø4 tube ø6 tube ø40 to ø50 M5 Rc (PT) 1 8 ø6 Nylon tube ø6 Urethane tube M8 X 1 Male thread M10 X 1 Male thread M14 X 1 Male thread ø6 tube ø8 tube Vacuum entry ø2 to ø8 Thread dia.
PAGE 9
Vertical Vacuum Entry with Buffer Series ZPT How to Order Series ZPT with buffer ZPT 16 U GS K 20 06 Mounting thread (Male thread) diameter Pad dia. (mm) 02 04 06 08 10 13 16 20 25 32 40 50 A10 (Refer to Table e for applications.) ø2 ø4 ø6 ø8 ø10 ø13 ø16 ø20 ø25 ø32 ø40 ø50 ZX Vacuum entry (Refer to Table e for applications.) ZR Buffer stroke ZM (Refer to Table w for applications.) ZY Buffer style J K Rotating Non-rotating ZH ZU Pad style Material (Refer to Table q for applications.
PAGE 10
Series ZPT Connection Female Thread (Buffer) Pad Style Flat Vacuum Entry Vertical Mounting Buffer Body Flat ø2, ø4, ø6, ø8 Flat style Model A B C ZPT02U -B -A8 2 2.6 1.2 ZPT04U -B -A8 4 4.8 1.6 ZPT06U -B -A8 6 7 ZPT08U -B -A8 8 9 D E ZPT U 6-B -A8 18 15 ZPT U 10-B -A8 23 ZPT U 15-B -A8 28 ZPT U 25-B -A8 38 2.5 Y 0.8 1 Dimensions by stroke Model 3.
PAGE 11
ZPT Vertical Vacuum Entry with Buffer Series Connection Female Thread (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø10, ø13, ø16 ø10, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Deep style Flat style/Flat with ribs Model ZPT10 U C -B5-A10 ZPT13 U C -B5-A10 ZPT16 U C -B5-A10 B A C 10 12 13 15 16 18 12 D Flat 21 12.5 21.
PAGE 12
Series ZPT Connection Female Thread (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø20, ø25, ø32 Deep style Flat style/Flat with ribs Model ZPT20 U C -B5-A10 ZPT25 U C -B5-A10 ZPT32 U C -B5-A10 B A 20 23 C 14 Model Y D Flat 23 25 28 32 35 14.5 23.5 ø20, ø25 E E ZPT25D 10-B5-A10 1.7 50.5 114.5 1.8 ZPT25D 30-B5-A10 60.5 124.5 2.3 ZPT25D 40-B5-A10 70.5 160.5 ZPT25D 50-B5-A10 80.5 170.5 4.
PAGE 13
Vertical Vacuum Entry with Buffer Series ZPT Connection Female Thread (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø40, ø50 ø40 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs Model Deep style A B C D ZPT40 U C -B -A14 40 43 18.5 ZPT50 U C -B -A14 50 53 19.5 Y Model ø40 ø50 ø40 ø50 ZPT U C 30-B -A14 64.5 65.5 123.5 124.5 ZPT U C 50-B -A14 84.5 85.5 168.5 169.
PAGE 14
Series ZPT Connection Female Thread (Buffer) Pad Style Bellows Vacuum Entry Vertical Mounting Buffer Body Bellows ø6, ø8 Bellows Bellows style Bellows style Model A B 9.1 ZPT10B -B5-A10 10 12 4.7 10.1 ZPT13B -B5-A10 13 15 ZPT16B -B5-A10 16 18 Model A B L M ZPT06B -B -A8 6 7 3.3 ZPT08B -B -A8 8 9 Dimensions by stroke F: M3 Model C D ZPT B 6-B -A8 19 15 45 ZPT B 10-B -A8 24 ZPT B 15-B -A8 29 43 83 ZPT B 25-B -A8 39 3.
PAGE 15
Vertical Vacuum Entry with Buffer Series ZPT Connection Female Thread (Buffer) Pad Style Bellows Vacuum Entry Vertical Mounting Buffer Body Bellows ø20, ø25, ø32 Bellows ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Bellows style Bellows style Model A B C ZPT20B -B5-A10 20 22 ZPT25B -B5-A10 25 27 24 33 15.6 28 ZPT32B -B5-A10 32 34 29 38 18.9 37 D L M 23.5 32.5 12.4 25 Y 10.5 Model A B C M Y ZPT40B -B -A14 40 43 34 47.5 24.
PAGE 16
Series ZPT Connection One-touch Fitting (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat ø2, ø4, ø6, ø8 Flat style Model A B C ZPT02U -0 -A8 2 2.6 1.2 ZPT04U -0 -A8 4 4.8 1.6 ZPT06U -0 -A8 6 7 ZPT08U -0 -A8 8 9 Model D E ZPT U 6-0 -A8 18 15 ZPT U 10-0 -A8 23 ZPT U 15-0 -A8 28 ZPT U 25-0 -A8 38 Y 0.8 2.5 1 Dimensions by stroke 3.
PAGE 17
Vertical Vacuum Entry with Buffer Series ZPT Connection One-touch Fitting (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø10, ø13, ø16 ø10, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs Deep style Model A B ZPT10 U C -0 -A10 10 12 ZPT13 U C -0 -A10 13 15 ZPT16 U C -0 -A10 16 18 C 12 Model A B C D Y Flat with ribs ZPT10D -0 -A10 10 12 15 24 6 1.
PAGE 18
Series ZPT Connection One-touch Fitting (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø20, ø25, ø32 Flat style/Flat with ribs Deep style Y Model A B ZPT20 U C -0 -A10 20 23 ZPT25 U C -0 -A10 25 28 ZPT32 U C -0 -A10 32 35 14.5 23.5 C D 14 23 Flat 4 4.5 ø20, ø25 E F G: ø4 G: ø6 E 1.7 ZPT25D 10-0 -A10 40.5 90.5 91.5 1.8 ZPT25D 20-0 -A10 50.5 128.5 129.5 2.3 ZPT25D 30-0 -A10 60.5 138.
PAGE 19
Vertical Vacuum Entry with Buffer Series ZPT Connection One-touch Fitting (Buffer) Pad Style Flat/Flat with Ribs/Deep Vacuum Entry Vertical Mounting Buffer Body Flat/Flat with ribs Deep ø40, ø50 ø40 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Deep style Flat style/Flat with ribs Model A B ZPT40 U C -0 -A14 40 ZPT50 U C -0 -A14 50 C D Y Model E 3.3 ZPT40D 10-0 -A14 3.8 ZPT40D 20-0 -A14 Flat Flat with ribs 43 18.5 32 6.5 53 19.5 33 7.
PAGE 20
Series ZPT Connection One-touch Fitting (Buffer) Pad Style Bellows Vacuum Entry Vertical Mounting Buffer Body Bellows ø6, ø8 Bellows Bellows style ø10, ø13, ø16 Bellows style Model A B J K Model A B C D ZPT06B -0 -AB 6 7 3.3 9.1 ZPT10B -0 -A10 10 12 16 25 ZPT08B -0 -AB 8 9 4.7 10.1 ZPT13B -0 -A10 13 15 ZPT16B -0 -A10 16 18 J 18.5 27.5 8.7 20 K Y 5.5 13.8 5.5 29 9.9 19 7.5 21 8.
PAGE 21
Vertical Vacuum Entry with Buffer Series ZPT Connection One-touch Fitting (Buffer) Pad Style Bellows Vacuum Entry Vertical Mounting Buffer Body Bellows ø20, ø25, ø32 Bellows ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Bellows style Bellows style A B ZPT20B -0 -A10 20 22 23.5 32.5 12.4 25 ZPT25B -0 -A10 25 27 24 33 15.6 28 ZPT32B -0 -A10 32 34 29 38 18.9 37 Model C D J K Y 10.5 14 Model A B C K Y ZPT40B -0 -A14 40 43 34 47.5 24.
PAGE 22
Series ZPT Connection Barb Fitting (Buffer) Vacuum Entry Vertical Flat ø2, ø4, ø6, ø8 Flat style Model A B C ZPT02U - 4-A8 2 2.6 1.2 ZPT04U - 4-A8 4 4.8 1.6 ZPT06U - 4-A8 6 7 ZPT08U - 4-A8 8 9 2.5 Dimensions by stroke Model D E F ZPT U 6- 4-A8 18 15 47 ZPT U 10- 4-A8 23 ZPT U 15- 4-A8 28 ZPT U 25- 4-A8 38 3.9-22 80 43 85 95 Y 0.
PAGE 23
Vertical Vacuum Entry with Buffer Series Connection Barb Fitting (Buffer) Vacuum Entry Vertical Flat/Flat with ribs Pad Style Flat/Flat with Ribs/Deep Mounting Buffer Body Deep ø10, ø13, ø16 ZPT ø10, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs Deep style Model A B ZPT10 U C - 6-A10 10 12 ZPT13 U C - 6-A10 ZPT16 U C - 6-A10 13 15 16 18 C 12 D Y Flat B C D Y ZPT10D U C - 6-A10 10 Model 12 15 24 6 1.
PAGE 24
Series ZPT Connection Barb Fitting (Buffer) Vacuum Entry Vertical Flat/Flat with ribs Deep ø20, ø25, ø32 Model A B ZPT20 U C - 6-A10 20 23 ZPT25 U C - 6-A10 25 28 ZPT32 U C - 6-A10 32 35 Model Y C D 14 23 Flat 14.5 23.5 ø20, ø25 E E 40.5 78.5 1.7 ZPT25D 20- 6-A10 50.5 116.5 1.8 ZPT25D 30- 6-A10 60.5 126.5 ZPT25D 40- 6-A10 70.5 162.5 ZPT25D 50- 6-A10 80.5 172.5 4.5 F ZPT U C 10- 6-A10 34.5 72.5 35 73 ZPT U C 20- 6-A10 44.5 110.
PAGE 25
Vertical Vacuum Entry with Buffer Series Connection Barb Fitting (Buffer) Vacuum Entry Vertical Flat/Flat with ribs Pad Style Flat/Flat with Ribs/Deep Mounting Buffer Body Deep ø40, ø50 ZPT ø40 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs Model Deep style A B C D ZPT40 U C - 6-A14 40 43 18.5 ZPT50 U C - 6-A14 50 53 19.5 E F ZPT40D 10- 6-A14 Model 55 124 3.3 ZPT40D 20- 6-A14 65 127 3.
PAGE 26
Series ZPT Connection Barb Fitting (Buffer) Vacuum Entry Vertical Bellows ø6, ø8 Pad Style Bellows Mounting Buffer Body Bellows Bellows style ø10, ø13, ø16 Bellows style A B H J Model A B C D ZPT06B - 4-A8 6 7 3.3 9.1 ZPT10B - 6-A10 10 12 16 25 ZPT08B - 4-A8 8 9 4.7 10.
PAGE 27
Vertical Vacuum Entry with Buffer Series Connection Barb Fitting (Buffer) Vacuum Entry Vertical Bellows ZPT Pad Style Bellows Mounting Buffer Body ø20, ø25, ø32 Bellows ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Bellows style Bellows style Model A ZPT20B - 6A10 20 22 ZPT25B - 6A10 25 27 24 ZPT32B - 6A10 32 34 29 B C D J H 23.5 32.5 12.4 25 33 15.6 28 38 18.9 37 Y Model ø25 E 10.
PAGE 28
Series ZPR Vacuum Entry without Buffer ZPR Lateral With One-touch Fitting Tube dia. Thread dia. Mounting Vacuum entry Specifications Lateral One-touch fitting ø4, ø6 Tube ø4, ø6 Tube ø4, ø6, ø8 Tube ø6, ø8 Tube Direction Connection ø2 to ø8 ø10 to ø16 ø20 to ø32 ø40 to ø50 Connection ø2 to ø8 ø10 to ø16 ø20 to ø32 ø40 to ø50 Male thread M5, M6 M5, M6 M6, M8 X 1 M6, M8 X 1 Female thread M4, M5 M5, M6 M5, M6, M8 M6, M8 Pad Style Pad style Pad dia.
PAGE 29
Lateral Vacuum Entry without Buffer Series ZPR Model Model Pad dia.
PAGE 30
Series ZPR Connection One-touch Fitting Vacuum Entry Lateral Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Pad Diameters ø2, ø4 ,ø6, ø8 Pad Diameters ø10, ø13, ø16 Flat style Model øA øB øC ZPR02U ZPR04U ZPR06U ZPR08U 2 4 6 8 2.6 4.8 7 9 øP 4 6 Q 20.6 21.6 I: M5 I: M6 D E D E 1.2 1.6 2.5 2.5 20 65.5 25 70.5 R 15.6 16.6 øS 10.4 12.8 Y 0.8 1 Applicable tube Applicable tube O.D. ø4 ø6 Flat style/Flat with ribs Model øA øB C D E F 12 21 29.
PAGE 31
Lateral Vacuum Entry without Buffer Series Connection One-touch Fitting Vacuum Entry Lateral ZPR Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Pad Diameters ø20, ø25, ø32 Pad Diameters ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs C Flat style/Flat with ribs l: M6 G H I: M8 X 1 Y D E F G H Flat Flat w/ ribs 1.7 29 39.8 57.6 83.5 73.5 4 25 15 1.8 Model øA øB ZPR20 U C 20 23 ZPR25 U C 25 28 ZPR32 U C 32 35 14.5 29.5 40.3 58.
PAGE 32
Series ZPR Connection One-touch Fitting Vacuum Entry Lateral Pad Style Bellows Mounting Male Thread Pad Diameters ø6, ø8 Pad Diameters ø20, ø25, ø32 I: M5 E Model øA øB øC ZPR06B ZPR08B 6 8 7 9 2.5 20 øP 4 6 Q 20.6 21.6 R 15.6 16.6 D 66.5 I: M6 D D 25 71.5 øK øL Y 3.3 4.7 9.1 10.1 4 Applicable tube Applicable tube O.D. ø4 ø6 ZPR10B ZPR13B ZPR16B 10 13 16 C D E F Applicable tube Applicable tube O.D. ø4 ø6 3.9-32 øP 4 6 Q 20.6 21.6 20 25 32 C D E F øK øL Y 12.
PAGE 33
Lateral Vacuum Entry without Buffer Series Connection One-touch Fitting Vacuum Entry Lateral ZPR Pad Style Flat/Flat with Ribs/Deep Mounting Female Thread Pad Diameters ø2, ø4, ø6, ø8 Pad Diameters ø10, ø13, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style Model øA øB øC H: M4 D H: M5 D ZPR02U ZPR04U ZPR06U ZPR08U 2 4 6 8 2.6 4.8 7 9 1.2 1.6 2.5 2.5 4 5 Y 0.8 1 Applicable tube Applicable tube O.D. ø4 ø6 øP 4 6 Q 20.6 21.6 R 15.6 16.6 øS 10.4 12.
PAGE 34
Seies ZPR Connection One-touch Fitting Vacuum Entry Lateral Pad Style Flat/Flat with Ribs/Deep Mounting Female Thread Pad Diameters ø20, ø25, ø32 Pad Diameters ø40, ø50 Flat style/Flat with ribs Model øA øB Flat style/Flat with ribs C D E F 14 29 39.8 57.6 ZPR20 U C 20 23 ZPR25 U C ZPR32 U C 25 28 32 35 14.5 29.5 40.3 58.1 H: M5 H: M6 H: M8 Y G G G Flat Flat with ribs 1.7 4 1.8 5 6 8 4.5 2.3 Deep style Model 28 C D E F 20 35 45.8 63.
PAGE 35
Lateral Vacuum Entry without Buffer Series Connection One-touch Fitting Vacuum Entry Lateral ZPR Pad Style Bellows Mounting Female Thread Pad Diameters ø6, ø8 Pad Diameters ø20, ø25, ø32 ZX ZR ZM ZY ZH ZU ZL Model øA øB øC H: M4 D H: M5 D øK øL Y ZPR06B ZPR08B 6 8 7 9 2.5 4 5 3.3 4.7 9.1 10.1 4 Applicable tube Applicable tube O.D. ø4 ø6 øP 4 6 Q 20.6 21.6 R 15.6 16.6 øA øB ZPR10B 10 ZPR13B 13 ZPR16B 16 C D E F 12 16 25 33.9 50 15 18.5 27.5 36.4 52.5 18 20 29 37.
PAGE 36
Series ZPR Lateral Vacuum Entry with Buffer ZPR With One-touch Fitting Mounting Applicable Thread dia. tube dia.
PAGE 37
Lateral Vacuum Entry with Buffer Series ZPR How to Order Series ZPR with buffer ZPR 16 U GS K 20 06 A10 Mounting thread Pad dia. (mm) 02 04 06 08 10 13 16 20 25 32 40 50 (Refer to Table e for applications.) ø2 ø4 ø6 ø8 ø10 ø13 ø16 ø20 ø25 ø32 ø40 ø50 ZX Vacuum entry (Refer to Table e for applications.) ZR Buffer stroke ZM (Refer to Table e for applications.) ZY Buffer Rotating J K Non-rotating ZH ZU Pad style (Refer to Table q for applications.
PAGE 38
Series ZPR Connection One-touch Fitting Vacuum Entry Lateral Flat Pad Style Flat Mounting Male Thread ø2, ø4, ø6, ø8 Flat style Model A B C Y ZPR02U -0 -A8 2 2.6 1.2 ZPR04U -0 -A8 4 4.8 1.6 ZPR06U -0 -A8 6 7 ZPR08U -0 -A8 8 9 2.5 0.8 1 Dimensions by stroke Model D E ZPR U 6-0 -A8 52.5 78.5 ZPR U 10-0 -A8 55.5 109.5 ZPR U 15-0 -A8 60.5 114.5 ZPR U 25-0 -A8 70.5 124.5 3.9-38 F G: ø4 G: ø6 H J H J 10.4 20.6 12.8 21.
PAGE 39
Lateral Vacuum Entry with Buffer Series Connection One-touch Fitting Vacuum Entry Lateral Flat/Flat with ribs ZPR Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø10, ø13, ø16 ø10, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Deep style Flat style/Flat with ribs Model ZPR10 U C -0 A10 ZPR13 U C -0 A10 ZPR16 U C -0 A10 A B 10 12 C 12 D E F Y Flat Flat w/ ribs 21 29.9 46 13 15 16 18 12.5 21.5 30.4 46.5 1.7 3 1.8 3.
PAGE 40
Series ZPR Connection One-touch Fitting Vacuum Entry Lateral Flat/Flat with ribs Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø20, ø25, ø32 Deep style Flat style/Flat with ribs A B ZPR20 U C -0 -A10 20 23 ZPR25 C -0 -A10 25 28 ZPR22 U C -0 -A10 32 35 14.5 29.5 40.3 58.1 4.5 C 14 D E F Y Model U 29 39.8 57.6 ø20, ø25 ø32 G H G H ZPR U C 10-0 -A10 68.6 102.6 69.1 103.1 ZPR U C 20-0 -A10 78.6 140.6 79.1 141.
PAGE 41
Lateral Vacuum Entry with Buffer Series Connection One-touch Fitting Vacuum Entry Lateral Flat/Flat with ribs ZPR Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø40, ø50 ø40 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Deep style Flat style/Flat with ribs Model A B C D E F Y Model Flat Flat w/ ribs ZPR40D 10-0 -A14 G H J 83.1 151.1 ZPR40 U C -0 -A14 40 43 18.5 32 42.8 60.6 6.5 3.3 ZPR40D 20-0 -A14 93.1 148.1 50 U ZPR50 C -0 -A14 50 53 19.
PAGE 42
Series ZPR Connection One-touch Fitting Vacuum Entry Lateral Bellows Pad Style Bellows Mounting Male Thread ø6, ø8 Bellows ø10, ø13, ø16 Bellows style Bellows style Model A B N P Model A B C D ZPR06B -0 -A8 6 7 3.3 9.1 ZPR10B -0 -A10 10 12 16 25 33.9 50 5.5 13.8 5.5 ZPR08B -0 -A8 8 9 4.7 10.1 ZPR13B -0 -A10 13 15 18.5 27.5 36.4 52.5 8.7 19 7.5 ZPR16B -0 -A10 16 18 Dimensions by stroke Model C D E ZPR B 6-0 -A8 53.5 79.
PAGE 43
Lateral Vacuum Entry with Buffer Series Connection One-touch Fitting Vacuum Entry Lateral Bellows ZPR Pad Style Bellows Mounting Male Thread ø20, ø25, ø32 Bellows ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Bellows style Bellows style Model A B ZPR20B -0 -A10 20 22 23.5 38.5 49.3 67.1 12.4 25 ZPR25B -0 -A10 25 27 24 39 49.8 67.6 15.6 28 ZPR32B -0 -A10 32 34 29 44 54.8 72.6 18.9 37 D C E F N P Y 10.
PAGE 44
Series ZPY Vacuum Entry without Buffer ZPR ZPY Lateral With Barb Fitting Thread dia. Mounting Applicable tube dia.
PAGE 45
Lateral Vacuum Entry without Buffer Series ZPY Model Model Pad dia.
PAGE 46
Series ZPY Connection Barb Fitting Vacuum Entry Lateral Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Pad Diameters ø2, ø4, ø6, ø8 Flat style Pad Diameters ø20, ø25, ø32 Deep style: ZPY25D only Flat style Flat style Model ZPY02U ZPY04U ZPY06U ZPY08U Applicable tube øA øB øC H: M5 E D H: M6 D E Applicable tube O.D Y 2 2.6 1.2 4 4.8 1.6 0.8 20 44 25 49.5 6 7 2.5 8 9 1 P Q øR N4 (Nylon tube ø4, ø2.5) 13.5 5 1.8 N6 (Nylon tube ø6, ø4) 15.5 7 2.5 U4 (Soft tube ø4, ø2.5) 13.
PAGE 47
Lateral Vacuum Entry without Buffer Series Connection Barb Fitting Vacuum Entry Lateral ZPY Pad Style Bellows Mounting Male Thread Pad Diameters ø6, ø8 Bellows style Pad Diameters ø20, ø25, ø32 Bellows style ZX ZR ZM ZY ZH ZU Model øA øB ZPY06B ZPY08B 6 8 7 9 øC 2.5 H: M5 D H: M6 E 20 D 45 25 E øK øL 3.3 9.1 50.5 4.7 10.1 Y 4 Applicable tube P 13.5 15.5 13.5 15.5 Q 5 7 5 7 øB ZPY10B 10 ZPY13B 13 ZPY16B 16 12 15 18 øB ZPY20B 20 ZPY25B 25 ZPY32B 32 22 27 34 C D 23.5 33.
PAGE 48
Series ZPY Connection Barb Fitting Vacuum Entry Lateral Pad Style Flat/Flat with Ribs/Deep Mounting Female Thread Pad Diameters ø2, ø4, ø6, ø8 Flat style Pad Diameters ø20, ø25, ø32 Deep style: ZPY25D only Flat style Flat style/Flat with ribs Model øA øB øC ZPY02U ZPY04U ZPY06U ZPY08U 2 2.6 1.2 4 4.8 1.6 6 7 2.5 8 9 4 E: M5 D 5 Applicable type O.D Y 0.8 1 P Q øR N4 (Nylon tube ø4, ø2.5) 13.5 5 1.8 N6 (Nylon tube ø6, ø4) 15.5 7 2.5 U4 (Soft tube ø4, ø2.5) 13.
PAGE 49
Lateral Vacuum Entry without Buffer Series Connection Barb Fitting Vacuum Entry Lateral ZPY Pad Style Bellows Mounting Female Thread Pad Diameters ø6, ø8 Bellows style Pad Diameters ø20, ø25, ø32 Bellows style ZX ZR ZM ZY ZH ZU Model øA øB øC G: M4 D G: M5 D ZPY06B ZPY08B 6 8 7 9 2.5 4 5 øK øL 3.3 9.1 4.7 10.1 Y 4 Applicable tube Applicable tube N4 (Nylon tube, ø4, ø2.5) N6 (Nylon tube, ø6, ø4) U4 (Urethane tube, ø4, ø2.5) U6 (Urethane tube, ø6, ø4) P 13.5 15.5 13.5 15.
PAGE 50
Series ZPY Vacuum Entry with Buffer ZPR ZPY Lateral With Barb Fitting Specifications Direction Connection ø2 to ø8 ø10 to ø16 Applicable tube dia. ø20 to ø32 ø40, ø50 ø2 to ø8 ø10 to ø16 Thread dia.
PAGE 51
Lateral Vacuum Entry with Buffer Series ZPY How to Order ZPY Series with buffer ZPY 16 U GS K 20 U6 Mounting thread Pad dia. (mm) 02 04 06 08 10 13 16 20 25 32 40 50 A10 (Refer to Table e for applications.) ø2 ø4 ø6 ø8 ø10 ø13 ø16 ø20 ø25 ø32 ø40 ø50 ZX Vacuum entry (Refer to Table e for applications.) ZR Buffer stroke (Refer to Table w for applications.) ZM ZY Buffer style Rotating J K Non-rotating ZH ZU Pad style (Refer to Table q for applications.
PAGE 52
Series ZPY Connection Barb Fitting Vacuum Entry Lateral Flat Pad Style Flat Mounting Male Thread ø2, ø4, ø6, ø8 Flat style Model A B C ZPY02U - -A8 2 2.6 1.2 ZPY04U - -A8 4 4.8 1.6 ZPY06U - -A8 6 7 ZPY08U - -A8 8 9 Y 0.8 2.5 1 Dimensions by stroke Model D E F ZPY U 6- -A8 37 63 15 ZPY U 10- -A8 40 94 ZPY U 15- -A8 45 99 ZPY U 25- -A8 55 109 3.9-52 43 ø4 tube G 5 H ø6 tube J G 1.8 12.5 7 H J 2.5 15.
PAGE 53
Lateral Vacuum Entry with Buffer Series Connection Barb Fitting Vacuum Entry Lateral Flat/Flat with ribs ZPY Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø10, ø13, ø16 ø10, ø16 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Deep style Flat style/Flat with ribs Model A B ZPY10 U C - A10 10 12 ZPY13 U C - A10 13 15 ZPY16 U C - A10 16 18 12.5 22.5 38.
PAGE 54
Series ZPY Connection Barb Fitting Vacuum Entry Lateral Flat/Flat with ribs Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø20, ø25, ø32 Flat style/Flat with ribs Model Deep style A B ZPY20 U C - A10 20 23 ZPY25 U C - A10 25 28 ZPY32 U C - A10 32 35 14.5 24.5 42.5 C 14 D E Flat 42 24 ø20, ø25 ø32 F G ZPY U C 10- -A10 53 87 53.5 87.5 ZPY U C 20- -A10 63 125 63.5 125.
PAGE 55
Lateral Vacuum Entry with Buffer Series Connection Barb Fitting Vacuum Entry Lateral Flat/Flat with ribs ZPY Pad Style Flat/Flat with Ribs/Deep Mounting Male Thread Deep ø40, ø50 ø40 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Flat style/Flat with ribs Model Deep style A B C D Y E Flat Flat w/ ribs Model F G ZPY40D 10- 6-A14 69 137 ZPY40 U C - 6-A14 40 43 18.5 28.5 46.5 6.5 3.3 ZPY40D 20- 6-A14 79 134 ZPY50 U C - 6-A14 50 53 19.5 29.5 47.5 7.5 3.
PAGE 56
Series ZPY Connection Barb Fitting Vacuum Entry Lateral Bellows Pad Style Bellows Mounting Male Thread ø6, ø8 Bellows Bellows style Bellows style Model A B C D E M 9.1 ZPY10B - -A10 10 12 16 25 42 5.5 13.8 5.5 4.7 10.1 ZPY13B - -A10 13 15 18.5 28.5 44.5 8.7 19 7.5 ZPY16B - -A10 16 18 21 8.5 Model A B M N ZPY06B - -A8 6 7 3.
PAGE 57
ZPY Lateral Vacuum Entry with Buffer Series Connection Barb Fitting Vacuum Entry Lateral Bellows Pad Style Bellows Mounting Male Thread ø20, ø25, ø32 Bellows ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV Vacuum related Bellows style Bellows style Model A B C D E M N ZPY20B - - A10 20 22 23.5 33.5 51.5 12.4 25 ZPY25B - - A10 25 27 24 34 52 15.6 28 ZPY32B - - A10 32 34 29 39 57 18.9 37 Y 10.
PAGE 58
Series ZP Vacuum Pad/Components Refer to p.3.9-61 for part nos. of e to y. Construction Series ZPT Series ZPR Series ZPY Component Parts No.
PAGE 59
ZP Vacuum Pad Series Replacement Parts: Pad unit (With lock ring/Without lock ring) Lock Ring Unit/How to Order Pad Unit/How to Order ZP 10 U N Pad diameter (mm) 02 ø2 04 ø4 06 ø6 08 ø8 10 ø10 13 ø13 16 ø16 20 ø20 25 ø25 32 ø32 40 ø40 50 ø50 ZPL 1 X19 Applicable pad dia.
PAGE 60
Series ZP Replacement Parts: Pad Unit (With lock ring/Without lock ring) Bellows (B)/With lock ring Buffer mounting nut Pad diameter: ø6 to ø8 ZP06B to 08B Model SNJ-010A SNJ-015A SN-015A Pad diameter: ø10 to ø50 ZP10B to 50B Model ZP06B ZP08B ZP10B ZP13B ZP16B ZP20B ZP25B ZP32B ZP40B ZP50B Nom.size øA B06 B08 B10 B13 B16 B20 B25 B32 B40 B50 6 8 10 13 16 20 25 32 40 50 øB 7 9 12 15 18 22 27 34 43 53 øC 2.5 2.5 4 4 4 4 4 4 7 7 øD 7 7 13 13 13 15 15 15 18 18 E _ _ 11.7 14.2 15.
PAGE 61
Vacuum Pad Series ZP Replacement Parts: Adaptor/Buffer (Series ZPT) Appropriate adaptor or buffer can be selected for the currently used pad model. The same symbol Without Buffer [Pad model no.] Construction Replacement of the symbol ZP T 02 UN ZX A5 ZR ZP T [qAdaptor] Symbol 1 2 3 4 Pad dia. 02 to 08 10 to 16 20 to 32 40, 50 1 A5 ZM ZY ZH ZU ZL ZF With Buffer ZP [Pad model no.] ZP T 16 UGN K20 06 ZCU A10 CYV [qAdaptor] Buffer connection thread Symbol Pad dia.
PAGE 62
Series ZP Replacement Parts: Adaptor/Buffer (Series ZPR) The same symbol Without Buffer [Pad model no.] Construction Replacement of the symbol ZP R 16 UN Symbol Pad dia. 1 2 3 4 02 to 08 10 to 16 20 to 32 40, 50 [qAdaptor] ZP T 2 [wR type adaptor] ZP R S Symbol S L 04 A5 Adaptor connection thread B5 B8 B5 04 A5 Pad dia. 02 to 16 20 to 50 With Buffer [Pad model no.] ZP R 16 UGN K20 Symbol Pad dia.
PAGE 63
Vacuum Pad Series ZP Replacement Parts: Adaptor/Buffer (Series ZPY) Construction The same symbol Without Buffer Replacement of the symbol ZX [Pad model no. ] ZP Y 50 UN Symbol 1 2 3 4 N6 A8 ZR ZM Pad dia. 02 to 08 10 to 16 20 to 32 40, 50 ZY ZH ZU [qY type adaptor] N6 ZP Y 4 A8 ZL ZF ZP With Buffer ZCU [Pad model no.] ZP Y 50 UGN Symbol Pad dia.
PAGE 64
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.) Ordeer Mad Made to Order Specifications qOval Pad/without Buffer Non-standard oval pads without buffer for the ZPT, ZPR, and ZPY series. Specifications Applicable model ZPT/ZPR/ZPY (without buffer) Series ZPT ZPR ZPY Vertical Lateral Lateral Vacuum Direction entry Connection Female thread One-touch fitting Barb fitting Two ø3.5 mounting holes are provided. Mount the pad Mounting connection with bolts at the desired position.
PAGE 65
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.) Ordeer Mad Made to Order Specifications wOval Pad/with Buffer ZX ZR Non-standard oval pads with buffer for the ZPT, ZPR, and ZPY series.
PAGE 66
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.) Ordeer Mad Made to Order Specifications eBall-joint Pad/without Buffer Ideal for picking loads with a sloped surface.
PAGE 67
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.) Made to Order Specifications Ordeer Mad rBall-joint Pad/with Buffer ZX ZR Ideal for picking loads with a sloped surface.
PAGE 68
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.) Made to Order Specifications Ordeer Mad tHeavy Duty Vacuum Pad/without Buffer Pad for heavy duty material handling (ø150 to ø250).
PAGE 69
Series ZP (Consult SMC for detailed specifications, dimensions and delivery.
PAGE 70
3.