Datasheet

ManualsBrandsSMC ManualsAutomationVacuum Generator -90kPa 6mm

Variations

Model

Nozzle size

[mm]

Vacuum pressure reached

∗

[kPa]

Maximum suction ﬂ ow rate [l/min(ANR)]

Air consumption

[l/min(ANR)]

Port size

Type S Type L Type S Type L

ZU05첸A

0.5

−90 −48

71314

Ø 6 One-touch ﬁ tting

ZU07첸A

0.7 11 16 28

Rc 1/8

∗1 Supply pressure: 0.45 MPa

Compact and

Lightweight

Ø 10.4 / (Current model Ø 12.8)

3.9 g / (Current model 6.5 g)

52 mm / (Current model 59 mm)

Actual size

mm reduction

(11 % shorter)

Ø 10.4

Ø 12.8

59 mm

ZU05첸A

New

ZU05첸

Current model

O.D.

Weight

Overall

length

New female thread type

RoHS

In-line Type Vacuum Ejector

ZU 첸A Series

CAT.EUS100-118A-UK

Summary of content (4 pages)

PAGE 1
In-line Type Vacuum Ejector Compact and Lightweight O.D. Ø 10.4 Weight 3.9 g Overall length 52 mm RoHS New female thread type / (Current model Ø 12.8) / (Current model 6.5 g) / (Current model 59 mm) 59 mm 52 mm Actual size 7mm reduction (11 % shorter) Ø 12.8 Ø 10.4 New ZU05첸A Current model ZU05첸 Variations Model Nozzle size [mm] ZU05첸A ZU07첸A 0.5 0.
PAGE 2
In-line Type Vacuum Ejector ZU첸A Series How to Order Precautions ZU 05 S A Nozzle diameter 05 07 Symbol RoHS Port size — 01 0.5 mm 0.7 mm Ø 6 One-touch fitting Rc 1/8 female thread EXH Be sure to read this before handling the products. Refer to the back cover for safety instructions. For vacuum equipment precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: http://www. smc.
PAGE 3
In-line Type Vacuum Ejector Exhaust Characteristics/Flow Rate Characteristics (Representative value) ZU05LA Flow Rate Characteristics Air consumption –60 20 15 Suction flow rate –40 –20 10 5 0 0.2 0.3 0.4 0.5 0.6 0 0.7 –80 –60 –40 –20 2 4 6 8 20 15 Suction flow rate Air consumption –40 –20 10 10 5 0 Suction flow rate [L/min(ANR)] 0.1 0.2 0.3 0.4 0.5 0.6 –60 –50 –40 –30 –20 –10 0 0.
PAGE 4
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)∗1), and other safety regulations. Caution: Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.