Instruction manual 1

ManualsBrandsSmeg ManualsAppliances4 piece Stainless Steel Kitchen Appliances Package

Table of Contents

1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4

2. GENERAL INSTALLATION INSTRUCTIONS ......................................................................... 5

3. PREPARING THE BUILT–IN OVEN ....................................................................................... 6

4. MAKING THE ELECTRICAL CONNECTION .......................................................................... 7

NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED

TECHNICIAN. ANY TECHNICAL PROCEDURES MUST BE CARRIED OUT BY AN AUTHORIZED

TECHNICIAN.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to

install, commission and test the appliance

Summary of content (6 pages)

PAGE 1
Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4 2. GENERAL INSTALLATION INSTRUCTIONS ......................................................................... 5 3. PREPARING THE BUILT–IN OVEN ....................................................................................... 6 4. MAKING THE ELECTRICAL CONNECTION ..........................................................................
PAGE 2
Important Safety Instruction 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
PAGE 3
Important Safety Instruction 2. GENERAL INSTALLATION INSTRUCTIONS • Proper installation is your responsibility. Have a qualified technician install this oven. Make sure you have everything necessary for proper installation. It is the responsibility of the installer to comply with installation information specified on the model/serial ID plate. The model/serial ID plate can be found on the internal frame of the oven when the door is opened.
PAGE 4
Instructions for the Installer 3. PREPARING THE BUILT–IN OVEN HEAVY WEIGHT HAZARD WARNING - Have two or more people move and install the oven - Failure to do so can result in back injury or other personal injuries. The oven is designed for installation into any type of cabinetry as long as it is heat-resistant. Proceed according to the dimensions shown in Pictures 1, 2 and 3. For installing under a countertop, use the dimensions shown in Picture 3.
PAGE 5
Instructions for the Installer 4. MAKING THE ELECTRICAL CONNECTION ELECTRICAL SHOCK HAZARD WARNING - Disconnect the power to the junction box before making the electrical connection, - Electrically ground the appliance with green or green-yellow wire FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK. This appliance is manufactured with a yellow-green or green ground wire connected to the oven frame.
PAGE 6
Instructions for the Installer U.S. INSTALLATION ONLY – 3-WIRE GROUNDED JUNCTION BOX Refer to picture 1, where local codes allow the connection of the oven frame grounding conductor to the power supply cable neutral wire (white wire): - The ground wire must be connected first; - If local codes permit, connect the green or yellow-green ground wire from the appliance and the white wire from the appliance to the supply cable neutral wire (white wire).