Range Instructions for Installation and Use

Instructions for the user

6. USE OF THE COOKING HOB

6.1 Lighting of the cooking hob burners

Before lighting the hob burners check that the flame caps are in the

correct position and that their burner caps are in place, making sure that

the holes A in the flame caps correspond to the spark plugs and

thermocouples.

Grid B should be used with Chinese woks.

Each knob corresponds to the burner indicated. The

appliance is equipped with an electric lighting device.

To light the burners, press and turn the knob

anticlockwise to the large flame symbol

. Keep the

knob pressed for about 2 seconds to let the

thermocouple heat up.

If the burner turns off when the knob is released, it means that the

thermocouple isn’t hot enough. Repeat ignition and keep the knob

pressed longer.

Once the burner has been ignited, the flame can be regulated as

required.

Always check that the control knobs are in the position (off) when you

finish using the hob.

If the burners turn off accidentally, a safety device will trip after about 20

seconds to cut off gas flow (even with the gas tap open).