Instruction manual

Use
127
EN
Programmed cooking
1. After selecting a function and a cooking
temperature, press the control knob to
set the cooking time.
2. Press the control knob before the
symbol stops flashing to set the
cooking end time.
3. The symbol flashes. Turn the knob
right or left to set the cooking end time.
4. After a few seconds the symbols
and stop flashing. The appliance
waits for the delay start time.
5. Based on the values set, the appliance
will start a preheating stage of
approximately 10 minutes...
6. ... and it will then proceed with the
selected function.
Programmed cooking is the
function which allows a cooking
operation to be stopped at an
established time depending on the
time set by the user, after which the
oven will switch off automatically.