Instruction manual

Use
141
EN
7. A specific message will indicate when
you should put the dish in the oven and
start cooking.
8. Press the control knob to start cooking.
End of a preset recipe
1. When the preset recipe has finished,
the appliance will warn the user with
acoustic signals and the symbol
flashing.
2. To perform a new cooking operation
using the same parameters that are
currently set, press the control knob
(press twice if the acoustic signal is
active). The appliance will begin
cooking again automatically if it is still
at temperature, otherwise it will start
preheating.
3. Press the return knob to exit and end the
preset recipe.
The time shown does not include
preheating time.
Some predefined cooking
parameters can be changed at
any time, even after cooking has
started.
Cooking in sequence is useful for
cooking multiple dishes of the
same type. For example, cooking
several pizzas in quick succession.
It is not recommended to place
food in the oven during the
preheating stage. Wait for the
corresponding message.