Instruction manual

Use
116
4. After a few seconds the and
symbols stop flashing. The appliance
waits for the delay start time.
5. Based on the values set, the appliance
will start preheating of approximately 10
minutes.
6. It will then proceed with the selected
function.
7. At the end of the cooking cycle,
“function ended” appears on the display
and a buzzer will sound that can be
deactivated by pressing the control knob.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.