Instruction manual

Cleaning and maintenance
35
EN
The pizza stone base must always be
positioned with the notches indicated facing
towards the inside of the oven cavity.
Cleaning the pizza stone
The pizza stone should be washed
separately according to the following
instructions:
The stone must be cleaned after every use.
Do not heat it again if it has any
encrustations. To clean, pour 50 cc of
vinegar onto the stone, leave it to act for 10
minutes, then remove it by wiping with a
metallic mesh or abrasive sponge. Rinse
with water then leave to dry.
• Before cleaning, remove any burnt
residues from the stone with the aid of a
metal spatula or a scraper of the kind
used for cleaning glass ceramic hobs.
• For best results, the stone must still be
warm; otherwise, wash it in hot water.
• Use metal sponges or abrasive scotch-
brite pads, dipped in lemon juice or
vinegar.
• Never use detergents.
• Never wash in the dishwasher.
• Never leave the stone to soak.
• The damp stone must not be used for a
least 8 hours after the end of the
cleaning procedures.
• Over time, slight cracks may appear on
the surface of the stone. This is due to the
normal expansion caused by high
temperatures of the enamel coating the
stone.
4.6 Extraordinary maintenance
Replacing the oven light bulb (main oven)
1. Remove the protective cover (A) by
turning it anticlockwise.
2. Replace the light bulb with one of the
same type (B).
3. Re-fit the protective cover.
Live parts
Danger of electrocution
• Unplug the oven.
• Use protective gloves.
The main oven is fitted with two
25W incandescent light bulbs.