Instruction manual

Cleaning and maintenance
37
EN
Installing and removing the seal
To remove the seal:
To permit thorough cleaning of the auxiliary
oven, the door seal can be removed. There
are fasteners in the 4 corners and in the
centre to attach it to the edge of the oven.
• Pull the seal outwards at all points in
order to detach the fasteners.
To keep the door seals clean, use a non-
abrasive sponge and lukewarm water.
Seals should be soft and elastic.
To refit the seal:
• Hook the clips located in the 4 corners
and in the centre onto the seal.
Annual service by an authorised
person is recommended, or if any
of the following conditions are
noticed: Incomplete ignition,
appreciable yellow tipping,
carbon deposition, lifting, floating,
lighting back, or objectionable
odour.