User Manual
EN - 6
Turning off the machine the setting of
the
White or Orange
dispensing
menu remains in the memory at the
next restart.
Dispensing a drink
• It is possible to adjust the position of the
dispenser (11) according to the cup used.
For very high cups it is possible to remove
the drip tray (14).
• Place a cup or large cup under the
dispenser.
• Press the key for the desired function. For
each selected function, preparation stops
automatically. For specic functions, refer
to the paragraph “Description of controls
and alarms”.
• At the end of dispensing, all the keys light
up xed.
Dispensing can be stopped at any
time by pressing the dispensing
key again
.
Remember to reassemble the tray
(14) at the end of any dispensing.
It is completely normal that after a
prolonged inactivity of the machine
(breaks longer than 20 min
)
the
rst coffees are not at the right
temperature
.
The tips to obtain a hot
coffee immediately are given in the
section “What to do if
...”
Use
USE (Fig. E-F-G-H)
• Lift the tank cover (4) and pour fresh water
in the tank (5) being sure not to exceed the
indicated ‘Max’ level. Replace the water
tank cover when full (4).
• Lift the coffee bean container lid (2) and
introduce the coffee beans into the container
(3).
• Check that the drip tray (14) is correctly
positioned.
• Press the button (9) , the machine starts
the heating phase and the keys light up
ashing in sequence.
At the end of the heating, a self-cleaning
cycle of the internal circuits is carried out
and, once the cycle is nished, the machine
is ready to be used.
At the rst use it is recommended to
make at least one coffee to make a
complete break-in of all the circuits.
We recommend setting the water
hardness upon first use. Please
see the “Water hardness settings”
paragraph for this reason.
After 20 minutes of non-use, the
machine switches off. If it has made
at least one coffee, it performs a
self-cleaning cycle. Press the button
(9) to switch on the machine.
Change of dispensing program
The machine has two dispensing menus in
its memory: White and Orange. To switch
from one program to another, press the key
(20) .
In the White menu all the keys are illuminated
in white, in the Orange
menu, all the keys are
illuminated in orange.
For the specic functions of each menu, refer
to the paragraph “Description of controls and
alarms”