USER MANUAL EN كتيب االستخدام AR BEAN TO CUP COFFEE MACHINE ماكينة تحضير القهوة
We advise you to read this manual carefully, as it contains all the instructions for managing the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com ت .ال� تضمن الحفاظ عىل الخصائص الجمالية والوظيفية للمنتج الذي قمت شب�ائه ننصح بقراءة هذا الكتيب بعناية حيث يضم جميع التعليمات ي www.smeg.
4 “A” 32 2 5 31 3 33 6 1 10 11 7 30 8 12 15 13 9 14 “B” 24 23 25 22 21 18 9 16 14 “C” 17 20 19
26 “H” A B 6 27 34 28 14 “D” 4 “E” 2 “I” 5 12 13 3 29 “L” 8 “F” 14 15 “M” “G” 30 11 14
Important information for the user / مدختسملل ةماه تامولعم Instructions / تحذيرات ئ General information on this user manual, on safety and final disposal / �نها معلومات عامة عن دليل استخدام هذا الجهاز وسالمة استخدامه وكيفية التخلص عن الجهاز بشكل ي Description / الوصف Appliance description / وصف الجهاز Use / الستعمال إ Information on using your appliance / معلومات عن استخادم الجهاز Cleaning and care / ةنايصلا و فيظنتلا Information for proper cleaning and maintenance of the appliance/ م
The manufacturer reserves the right to make any changes deemed useful for the improvement of its products without priornotice. The illustrations and descriptions contained in this manual are therefore not binding and are merely indicative. ال تعتبر الرسوم التوضيحية، ولذلك.
EN Dear Customer, Thank you very much for purchasing the Smeg Line coffee machine. By choosing our product, You have opted for a solution in which aesthetics and innovative technical design offer unique objects, which become part of the furnishings. In fact, a Smeg household appliance always co-ordinates perfectly with other products in the range and, at the same time, can become a design object for the kitchen. We hope You fully appreciate the functionalities of Your appliance. Best regards. SMEG S.p.A.
Important Safeguards SAFETY Essential safety recommendations. Keep these instructions carefully. Whenever the appliance is transferred to other persons, they must also be given these user instructions. Danger of Electrocution, since the appliance operates on electric current, it is necessary to comply with the following safety warnings: • Do not touch the plug with wet hands. • Make sure that the power outlet used is always freely accessible, because only in this way can it be unplugged when necessary.
• Keep the appliance out of the reach of children under the age of 8. • Children must not play with the appliance. • The use of this appliance is allowed to people (including children of at least 8 years) with reduced physical, sensory or mental abilities only if they are under the control of adults or have been instructed on the safe use of the appliance and have understood the dangers associated with its use.
Description / Assembly / Controls DISPOSAL IDENTIFICATION PLATE Electrical appliances must not be disposed of with household waste. The appliances The identification plate states the technical data, serial number, and marking. The identification plate must never be removed. that have this symbol are subject to the European Directive 2012/19/EU.
“Orange” and vice versa. White Keys LED white 16 Ristretto coffee 17 Espresso coffee 18 Coffee 19 Hot water Orange Keys LED orange 16 Light Ristretto coffee 17 Light Espresso coffee 18 Long coffee 19 Steam function Empty water tank alarm (21) The related LED flashes when the tank (5) is absent, or when the water inside it is missing or at an insufficient level. Insert the tank or fill it with water.
Use USE (Fig. E-F-G-H) • Lift the tank cover (4) and pour fresh water in the tank (5) being sure not to exceed the indicated ‘Max’ level. Replace the water tank cover when full (4). • Lift the coffee bean container lid (2) and introduce the coffee beans into the container (3). • Check that the drip tray (14) is correctly positioned. • Press the button (9) , the machine starts the heating phase and the keys light up flashing in sequence.
Steam delivery • Enter the “Orange” dispensing program. • Make sure that the tray (14) is correctly assembled. • Press the button (19) which starts flashing. Wait until the button is steady lit and the buzzer sounds to indicate that the correct steam dispensing temperature has been reached (19) . • Place a container under the steam wand (30) with about 100 grams of milk for each cappuccino you want to prepare.
Use / Cleaning and maintenance Turning off the machine • Check that the drip tray (14) is positioned correctly. • If there is no water, the machine remains in the rinse position until the tank is filled. • Press the button (9) , the keys (16), (17), (18), (19) light up flashing in sequence and the machine, if it has dispensed at least one coffee, performs a self-cleaning cycle. At the end of the self-cleaning cycle, the machine switches off. MACHINE SETTINGS (Fig.
CLEANING AND MAINTENANCE (Fig. C-E-G-H-I-L) Incorrect use Risk of damage to surfaces. • Do not use steam jets to clean the coffee machine. • Do not use cleaning products containing chlorine, ammonia or bleach on parts with metal surface finishes (e.g. anodised, nickel- or chrome-plated). • Do not use abrasive or corrosive detergents (e.g. powder products, stain removers and metallic scourers). • Do not use rough or abrasive materials or sharp metal scrapers.
Cleaning and maintenance C l e a n i n g t h e c o f f e e g ro u n d s container (12) and internal tray (13) Always empty the coffee grounds container with the appliance switched on. This is the only way of resetting the coffee grounds counter. The counter resets at least 15 seconds after opening the various components and LED 23 flashes. • Remove the tray (14). • Remove the grounds container (12) with its tray (13) by pulling it outwards. • Empty the coffee grounds from the container (12).
Coffee powder residue can be found in the brewing group compartment. We recommend thorough cleaning whenever cleaning the brewing group. Use the supplied brush to remove any residue from the brewing group compartment. Dry all components and internal parts using a dry cloth before closing the side door. Steam wand cleaning (30) • Wait for the steam wand (30) to cool before operating. • Remove the lower part (34) of the steam wand by turning it anticlockwise to release it then pull it downwards.
Cleaning and maintenance Personal injury hazard. • The descaler contains acids that can irritate the skin and eyes. • Follow the manufacturer's instructions and safety warnings on the packet scrupulously in the event of contact with skin or eyes. • Use descaler products recommended by Smeg to prevent damage to the coffee machine. Any other servicing should be performed by an authorized service representative.
The machine doesn’t turn on. Possible causes EN What To Do If...... Problem Solution Plug not connected. Connect the plug. Plug not fully connected. Fully connect the plug to the machine. ON-OFF (9) button not pressed. Press the button to start the machine. ON-OFF (9) button not working. Contact an authorised service centre. Empty tank alarm or missing (LED 21 on). Make sure the tank is correctly assembled or fill with water, or rinse to remove any scale residues. No coffee alarm (LED 22 on).
Problem Possible causes Tank removed during dispensing or water under the minimum threshold. The machine stops when dispensing. Alarm 21 not on but water missing. Incorrect water reading in the tank due to lime scale inside the tank. Thoroughly clean and reassemble the tank. Run a descaling cycle if needed. Water erroneously poured in the tank gap. Remove the tank and thoroughly dry its compartment. Cups were not pre-heated.
Possible causes Turn the knob clockwise to loosen the coffee grinders. Note: some blends require rougher grinding than others. To avoid machine damages, adjust grinding being sure to rotate the knob when the grinders are running. Dispenser clogged. Manually clean as indicated in paragraph “Cleaning and Maintenance”. The cycle was not completed. Make sure the cycle and subsequent rinse are completed. After the first cycle, the machine requires a rinse cycle.
Problem Possible causes Hydraulic circuit error. All buttons flash simultaneously. The machine does not dispense steam. Insufficient frothing. Solution Make sure there is water in the tank and wait for the circuit to reset. The machine automatically returns to its initial position. If the problem persists, contact an authorised service centre. The steam function was not Follow the instructions correctly turned on. in paragraph “Steam dispensing”.