Contents 1.1 1.2 1.3 1.4 1.5 Introduction This user manual Intended use Manufacturer liability Disposal 2 Description 2.1 Product description 3 Use 7 7 7 8 8 9 9 10 3.1 Before first use 3.2 How to use the “Bottle to go” accessory 4 Cleaning and care 4.1 4.2 4.3 4.
Important Safeguards RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. This symbol alerts you to potential hazards that can result in severe personal injury or death. UNDERSTAND SIGNAL WORDS A signal word - DANGER, WARNING or CAUTION - is used with the safety alert symbol. DANGER denotes the most serious hazards. It means you could be killed or seriously injured if you do not immediately follow the instructions.
WARNING To reduce the risk of fire, electrical shock, personal injury, or damage when using the appliance, follow basic safety precautions, including the following: The “Bottle to go” accessory is an accessory of the BLF01 blender. Follow all safety instructions in order to use the accessory safely. • Before using the appliance, read both this manual and the manual supplied with the BLF01 blender carefully. • Do not use the appliance outdoors. • Switch off the appliance immediately after use.
Important Safeguards For this appliance and the accessory • Do not touch moving parts while the appliance is operating. Keep hands, hair and clothing, and utensils away from the blades during operation, to prevent personal injury and/or damage to the appliance. • Always disconnect the blender from the supply if it is left unattended and before assembly, disassembly or cleaning. Unplug the blender when it is not being used, before cleaning it and if you notice any fault.
1 Instructions 1.1 Introduction Key information for the user: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and the accessory. Use Information on the use of the appliance and the accessory. Cleaning and care Information for proper cleaning and maintenance of the appliance and the accessory. Safety instructions Information Advice 1.
Important Safeguards 1.5 Disposal Warning • This product contains a chemical known by the State of California to cause cancer, birth defects or other reproductive harm. • This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, carbon monoxide, toluene, and soot. 1.
Description EN IT 2 Description 2.1 Product description Model BGF01US - “Bottle to go” Accessory 1 BPA-free cap with spout 2 Cover with silicone seal 3 BPA-free bottle (max.
Use 3 Use Electrical Shock Hazard • • • • • Plug into a grounded 3-prong outlet. Do not remove the ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. “Blender US version only” Volts: 120 Volts AC only. Hertz: 60 Hz Your blender has a 3-prong grounded plug. To reduce the risk of electrical shock, this plug will fit into an outlet only one way.
Use 1. Remove any labels from the blender and accessory. 2. Clean the motor base using a damp cloth. 3. Wash the bottle with hot water and washing-up liquid or in the dishwasher, after removing the blade assembly. 3.2 How to use the “Bottle to go” accessory EN IT 3.1 Before first use 1. Prepare the ingredients and put them into the bottle. 4. Dry thoroughly. Danger of sudden start-up • Make sure the blender is unplugged before fitting or removing the blade assembly.
Use 2. Rest the blade assembly (1) on the mouth of the bottle. 3. Screw the blade assembly support (2) onto the bottle. Sharp blades Danger of cuts • Never touch the blades with your hands. • Take great care when installing and removing the blade assembly. The accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation.
4. Turn the bottle over and connect it to the base of the blender. 5. Select one of the four available speeds (1 to 4) or one of the two preset programs (Pulse or Smoothie) and operate the blender to prepare the beverage. Risk of damage to the accessory • The Ice Crush programme cannot be used with the “Bottle to go” accessory. • If you wish to add ice, crush it in the blender jug, then add this to the bottle. For further information on which speed to set, see section “3.
Use 6. Remove the bottle from the blender base by pushing upwards. 7. Remove the blade assembly support and blade assembly (2). 14 8. Screw the cap (3) onto the bottle and put the cover on (4).
Cleaning and Care 4.1 Instructions Improper use Danger of electrocution • Unplug the blender before cleaning it. • Do not immerse the motor base in water or other liquids. 4.3 Cleaning the accessory and blade assembly EN IT 4 Cleaning and care The “Bottle to go” accessory and its dedicated blade assembly can be washed by hand using hot water and washing-up liquid. The “Bottle to go” accessory can also be washed in the dishwasher, after removing the blade assembly.