Operation Manual

Instructions for the User
33
BURNER CONTROL KNOB
These knobs can be used to light the burners inside the barbecue.
To light the flame, proceed as described in point “9.3.1 Electronic burner
ignition”. Burners can also be lit by hand; see point “9.3.2 Manual burner
ignition (for internal burners only)” for further details.
AUXILIARY / RAPID BURNER CONTROL KNOB (Models BQ6130 - BQ6130S only)
These knobs can be used to light the Auxiliary or Rapid
side burners. These burners are useful for conventional
cooking or for keeping barbecued food hot.
To light the flame, proceed as described in point “9.3.1
Electronic burner ignition”.
This appliance is not fitted with a safety valve for internal burners. It therefore must never be left
unattended when in operation. If you notice that the flames have gone out, turn the knobs to the OFF
position AT ONCE and wait a few minutes before attempting to ignite the burners again.
The lid (if fitted) must always be kept open while the burners are being lit. It can be lowered once they
have ignited and must be raised as soon as the thermometer fitted on it reaches 300°C. Take care not to
obstruct the combustion gas outlet flue in the back of the lid.
When the appliance is used for the first time, operate all the burners for 15 minutes with nothing on them
and with the lid (where fitted) open to burn off any oils and manufacturing residues.
WARNING: TO PREVENT COMBUSTION OF RESIDUE FROM PREVIOUS USE OF THE
BARBECUE, CLEAN THE DRIPPING PAN, BURNER COMPARTMENT, CERAMIC PLATES AND
THE BURNERS THEMSELVES BEFORE EACH USE.