User manual

Conversion Kit

1) Broil burner: Open the oven door and remove any accessories that are inside.

2) Unscrew the two fastening screws for the

burner.

3) Remove the burner by sliding it from its

place and reposition it as shown in the

picture. (Make sure not to damage the

thermocouples and the spark electrode).

4) Using a 13mm socket wrench replace the

nozzle, installing the one that is appropriate

for the type of gas to be used. Refer to the

gas charts at point 5.

5) WARNING: The tightening torque of the

nozzle must be equal to 4 Nm - 14.4 Ozf.

Correctly reposition the burner in its place and

screw in the two fastening screws.