User guide

Instructions for the user
12
5. USING THE RANGETOP
WARNING
FIRE HAZARD
- Do not allow the burner flame to extend beyond the
edge of the pan.
- Turn off all controls when the range is not in use.
NOTE: Check that the burner heads, burner caps and grates are correctly positioned. Before lighting the
rangetop burners, check that each burner head is correctly positioned with its respective burner cap.
Before lighting the hob burners, make sure that the flame-spreader crowns are correctly positioned in
their housings with their respective burner caps. Make sure that the holes 1 in the flame-spreader
crowns are aligned with the igniters 3 and thermocouples 2.
5.1 Ignition safety device
Each burner knob has a marking corresponding to the burner it controls (the example at the left, shows
the front left burner).
The appliance is equipped with spark electrode ignition.
- Just turn the knob counterclockwise to the simmer flame symbol until the burner turns on.
NOTE: If the flame accidentally goes out, an automatic system will attempt to relight it. If the attempt to
relight it is unsuccessful, an internal safety device will block the flow of gas. To restore the correct
operation of the lighting system, return the knob to the position and repeat the procedure.
REMEMBER: When the rangetop is in use, the entire range area may become hot.
NOTE: Do not try to manually relight the flame.