Installation and Operation Guide

Instructions for the installer

3) 4)

Use the same height on the wall to drill

the

holes for fastening the brackets. The

distance

between the centres of the holes is given in

the

diagram

above.

Before tightening the brackets fully to the

wall,

check that the index on the brackets is at

the

same height as the index on the back of

the

appliance. Position the appliance, taking

care

that the brackets are correctly

inserted.

11.10 Wall fixing

1 Attach the chain to the cooker

2 Stretch out the chain attached to the cooker horizontally so that the other end touches the wall.

3 Mark the wall in the position where the hole is to be drilled.

4 Drill the hole, insert a wall plug and attach the chain.

5 Once the chain is in position, push the cooker against the wall and reduce the amount of chain links

to keep the chain tight to prevent any excess movement.