Instruction manual

Use
79
EN
Keep warm
To activate the keep warm function:
Turn the knob for the desired cooking
zone until the symbol appears on
the corresponding display.
Multizone function
To activate the Multizone function:
1. Turn the front left and rear left cooking
zone knobs anticlockwise at the same
time and hold them at the M-A position
until a short beep is emitted.
2. Turn the front left cooking zone knob
back to the 0 position and turn the rear
left cooking zone knob until it reaches
position 9. A prolonged beep will be
emitted.
3. Use the front left cooking zone knob to set
the required power: this knob now controls
both the cooking zones that are in use.
To deactivate the Multizone function:
Put both knobs back to the 0 position (off).
Booster function
Turn the knob clockwise to the P position
for two seconds and then release.
The display shows the symbol. After 5
minutes, the Booster function will be
disabled automatically and cooking will
continue at power level 9.
The Keep warm function allows
you to keep cooked food hot.
This function can be used to:
operate two cooking zones (front
and rear) simultaneously when
using pans like fish kettles or
rectangular pans.
The cooking zones with the
Multizone function are the front left
and the rear left cooking zones.
This function automatically divides
the power equally between both
zones that are in use.
The booster function allows the
cooking zone to be activated at
maximum power for as long as 5
minutes. It can be used to bring a
large quantity of water to a boil
rapidly or to broil meat.