Instruction manual

EN - 7
EN
Description/Use
GRINDING TIMES (Fig. E-F)
The functions envision pre-set supply settings
of ground coffee. However, depending on
personal taste, the pre-set amount of ground
coffee can be increased or decreased, thus
customising the different functions.
Customise the amount of grinding
for espresso coffee
• Make sure that the grinding indicator (12)
is positioned at an adequate grinding level
for espresso coffee (FINE).
• Turn the knob (7) to “ ”.
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; the lock nut (14) ashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops ashing and the new setting
is memorised.
By modifying the amount of Mild
espresso coffee ground, the amount
of Bold espresso coffee is also
modied automatically.
Customising the amount of ground
coffee for American/Chemex/French
press coffee
• Make sure that the grinding indicator (12)
is positioned at an adequate grinding level
for American/Chemex/French press coffee
(MEDIUM/COARSE).
• Turn the knob (7) to “2”.
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; The lock nut (14) ashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops ashing and the new setting
is saved.
By modifying the amount of
American/Chemex/French press
coffee ground, for the 2-cup
selection, the amount of espresso
coffee for the other pre-set functions
present on the knob is modied
automatically (from 2 to 12).
Resetting factory values
To reset the factory values:
• Turn the knob (7) onto program “12”.
• Press the START/STOP button (6) and hold
it down for 5 seconds. The lock-nut (14)
ashes 5 times indicating that all factory-
set values have been reset (for Espresso
functions and American Coffee/Chemex/
French press functions).