AUTOMATIC BUILT-IN COFFEE MACHINE EN INSTRUCTION MANUAL
A15 A16 A21 A A24 A22 A17 A11 A2 A3 A5 A23 A7 A8 A6 A19 A9 A1 A13 A18 A10 A4 A12 A14 2 A20
B B2 B3 B4 B5 B6 B7 00:00 B1 AROMA B11 PROFILE 1 SELECT BEVERAGE QUANTITY B8 B10 B9 ESPRESSO COFFEE CAPPUCCINO LATTE MACCHIATO C3 C C4 C1 C2 C6 C5 C7 D2 D D5 D1 D4 D7 D3 D6
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40 41 42 44 45 B A B A 43 6
CONTENTS MAKING MILK-BASED HOT DRINKS......................................14 Filling and attaching the milk container.......................14 Adjusting the amount of froth......................................14 Making milk based hot drinks automatically................14 Cleaning the milk container after use...........................15 INTRODUCTION......................................................................8 Symbols used in these instructions.................................
A5. Infuser A6. Lighting to illuminate interior compartment A7. On/stand-by button A8. Control panel A9. Tray for objects A10. Hot water/steam connection nozzle A11. IEC connector A12. Water tank A13. Coffee spouts (adjustable height) A14. Drip tray A15. Beans container lid A16. Beans container A17. Grinding adjustment dial A18. Lights to illuminate cup A19. Main ON/OFF switch A20. Measure holder A21. Ground coffee funnel A22. Power cord A23. Pre-ground door A24.
D2 D3. D4. D5. D6. D7. Lid with milk frother Milk container Milk intake tube Adjustable frothed milk spout Thermal casing Lid release buttons • • • PRELIMINARY OPERATIONS Checking the appliance After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact customer services Technical Assistance.
• • 1. Press (B2) to enter the menu; 2. Press (B10) or (B8) until DRINKS SETTINGS appears on the display (B); 3. Press : The values for the first beverage appear on the display; 4. The reference user profile is highlighted on the display. The values are shown on the vertical bars: the manufacturer de- first turn the appliance off by pressing the button (fig. 9); release the main switch (A23) situated on the side of the appliance (fig. 2). Important! Never press the main switch while the appliance is on.
To enable auto-start, proceed as follows: 1. Press (B2) to enter the menu; 2. Press (B10) or (B8) until the display (B) shows AUTO-START; 3. Select the function by pressing : The time setting panel appears on the screen; 4. Press or corresponding to the hours and minutes until the required auto-start time is displayed; 5. Press or to enable or disable auto-start. 6. To confirm, press (to cancel and go back to the settings menu press ), then press to go back to the homepage.
To disable or enable this function, proceed as follows: 1. Press (B2) to enter the menu; 2. Press (B10) or (B8) until the display (B) shows LIGHT; 3. Press to enableor disablethe cup lighting; 4. Press to go back to the homepage.
Making coffee using coffee beans Making coffee using pre-ground coffee Important! Do not use green, caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable. • 1. Fill the beans container (A16) (fig. 12) with coffee beans; 2. Place a cup under the coffee spout (A13); 3. Lower the spout so that it is as near as possible to the cup (fig. 13): this helps achieve a better cream; 4. Press (B10) or (B8) until the required coffee is displayed; 5.
preparation. • If the coffee comes out too slowly or does not come out at all, a message will be shown GROUND TOO FINE. ADJUST GRIND LEVEL, turn the coffee mill dial one or two clicks clockwise. If "Energy Saving" mode is enabled, there may be a few seconds delay before the beverage is delivered. 1. Make sure the milk intake tube (D4) is correctly inserted in the bottom of the milk container lid (fig. 17); 2. Place the lid back on the milk container; 3. Remove the hot water/steam spout (C6) (fig. 18); 4.
• • Please note: general indications when preparing all milk based drinks • : press to interrupt preparation completely and go back to the homepage. • : press to interrupt milk or coffee delivery and move on to the next delivery (if applicable) to complete the beverage. • At the end of delivery, to increase the quantity of coffee in the cup, press . • Preparation of each milk based drink can be customised (see sections “Customising beverages” and “Memorising your personal profile”).
TO SAVE: Preparation begins and the appliance displays the quantity customising screen in the form of a vertical bar. The star alongside the bar represents the current quantity set. 6. When the amount reaches the minimum quantity you can set, the display shows . 7. Press when the required quantity in the cup is reached. 8. SAVE NEW SETTINGS? : Press YES or NO. The appliance confirms if the values have been saved or not (depending on the previous selection): press . The appliance goes back to the homepage.
• • • Cleaning the drip tray Important! Do not use solvents, abrasive detergents or alcohol to clean the coffee machine. It is not necessary to use chemical products to clean the machine. None of the components of the appliance can be washed in a dishwasher with the exception of the milk container (D). Do not use metal objects to remove encrustations or coffee deposits as they could scratch metal or plastic surfaces.
Cleaning the pre-ground coffee funnel 5. Wash all the components of the frother thoroughly with hot water and mild washing-up liquid. All components and the container are dishwasher safe, placing them in the top basket of the dishwasher. Pay particular attention to check in the hollow and groove under the dial (fig. 37) that no milk residues remain: scrape any residue from the groove with a toothpick. 6. Rinse inside the froth adjustment dial seat (fig.
A marked inside the tank (equal to one 100 ml pack); then add water (one litre) up to level B; and put the water tank back in. Press ; 6. EMPTY GROUND CONTAINER AND DRIP TRAY (fig. 27): remove, empty and replace the drip tray (A14) and the ground container (A4). Press ; 7. PLACE 2.5l CONTAINER UNDER OUTLET PRESS OK TO START DESCALING : Place an empty container with a minimum capacity of 2.5 litres under the hot water/steam spout (C6) and coffee spouts (A13) (fig. 8); RINSING PLEASE WAIT is displayed. 18.
press as far as it will go. Press ; 5. INSERT WATER TANK : Close the tank with the lid (A15), then replace the tank in the machine. 6. PLACE 0.5L CONTAINER UNDER OUTLET, PRESS OK TO FILL FILTER (fig. 8): place the container under the hot water/ steam spout (C6) and press : delivery starts and stops itself automatically. Setting water hardness 1. Press 2. Press (B2) to enter the menu; (B10) or (B8) until the display (B) displays WATER HARDNESS ; 3.
5. On the display 6. Press EN REMOVE FILTER appears; ; 7. REMOVE FILTER? : press (or to go back to the settings menu, press ); 8. FILTER REMOVED : the appliance has recognised the change. Press to go back to the homepage. Please note: After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should remove/replace the filter even if the message has not yet been displayed. TECHNICAL DATA Voltage: 220-240 V~ 50/60 Hz max.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL WATER TANK WITH FRESH WATER Water in the tank (A12) is not sufficient. Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. EMPTY GROUND CONTAINER The grounds container (A4) is full. Empty the grounds container and drip tray (A14), clean and then replace them. Important: when removing the drip tray, the grounds container must always be emptied, even if it contains few grounds.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY ADD PRE-GROUND COFFEE PRE-GROUND MAXIMUM ONE MEASURING CUP A LONG coffee with pre-ground coffee Place pre-ground coffee in the funnel (A21) (fig. 14) has been requested and press to continue and complete delivery. FILL BEAN CONTAINER The coffee beans have run out. GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION The grinding is too fine and the coffee is Repeat coffee delivery and turn the grinding adjustment dial (fig.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY INSERT WATER OUTLET The hot water spout (C6) is not inserted or is inserted incorrectly Insert the water spout as far as it will go. INSERT MILK CONTAINER The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig. 19). INSERT BREWING UNIT After cleaning the infuser (A19) has not Insert the infuser as described in par. "Cleaning the been replaced. infuser".
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY PRESS OK TO START CLEANING PROCESS OR TURN MILK FROTH ADJUSTMENT KNOB The milk container has been inserted To proceed with the CLEAN function, press with the froth adjustment dial (D1) in the or turn the froth adjustment dial to one of the milk CLEAN position . positions. TURN THE MILK FROTH ADJUST- Milk has been delivered recently and the MENT KNOB TO START CLEANING tubes inside the milk container must be cleaned (D).
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY GENERAL ALARM: REFER TO USER MANUAL The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described in section “Cleaning”. If the message is still displayed after cleaning, contact an authorised Customer Service centre. Reminder that appliance needs de-scaling The de-scaling procedure described in section “Deand/or the filter (C4) must be replaced.
TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services Technical Assistance. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water (Please note! the hot water function can be used).
PROBLEM POSSIBLE CAUSE REMEDY The milk does not come out of the The lid (D2) of the milk container (D) Clean the milk container lid as described in par. milk spout (D5) is dirty "Cleaning the milk container". The milk contains large bubbles and The milk is not cold enough or is not Use fully skimmed or semi-skimmed milk at squirts out of the milk spout (D5) or semi-skimmed or skimmed. refrigerator temperature (about 5° C).
ESPRESSO Origin PROCESS Italy Grinding Coffee powder 6-11gr (according to aroma) Brewing Pre-infusion • Infusion high pressure (9-12 bar) RESULT IN CUP Default Quantity ~ 40ml Cream compact and nut-coloured Taste intense OCCASION OF USE short-term pleasure, every moment of the day COFFEE Origin PROCESS Germany & Central Europe Grinding Coffee powder 8-14gr (according to aroma) Brewing Pre-infusion no pre infusion Infusion high pressure (9-12 bar) RESULT IN CUP Default Quanti
CAPPUCCINO Origin PROCESS RESULT IN CUP OCCASION OF USE CAPPUCCINO+ Origin PROCESS RESULT IN CUP OCCASION OF USE CAPPUCCINOMIX Origin PROCESS RESULT IN CUP OCCASION OF USE LATTE MACCHIATO Origin PROCESS RESULT IN CUP OCCASION OF USE FLAT WHITE Origin PROCESS RESULT IN CUP OCCASION OF USE CAFFELATTE Origin PROCESS RESULT IN CUP OCCASION OF USE Italy Coffee balanced (~ 80ml) Milk balanced (~ 70ml) Milk foam maximum level Delivery order milk first, coffee afterwards Visual separate l
The manufacturer reserves the right to make any changes deemed useful for improvement of its products without prior notice. The illustrations and descriptions contained in this manual are therefore not binding and are merely indicative.
SMEG S.p.A. Via Leonardo Da Vinci, 4 42016 San Girolamo di Guastalla (RE) ITALY www.smeg.