MANUALE DʼUSO INSTRUCTIONS MODE DʼEMPLOI BEDIENUNGSANLEITUNG GEBRUIKSAANWIJZINGEN MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ UŽIVATELSKÁ PŘÍRUČKA INSTRUKCJA OBSŁUGI BRUKSANVISNING BRUGERVEJLEDNING MACCHINA PER CAFFÈ E CAPPUCCINO COFFEE AND CAPPUCCINO MAKER MACHINE À CAFÉ ET À CAPPUCCINO KAFFEE-/CAPPUCCINO-VOLLAUTOMAT KOFFIE- EN CAPPUCCINOAPPARAAT CAFETERA PARA CAFÉ Y CAPUCHINO MÁQUINA DE CAFÉ E CAPPUCCINO ΜΗΧΑΝΗ ΚΑΦΕ ΚΑΙ CAPPUCCINO КОФЕМАШИНА ДЛЯ ПРИГОТОВЛЕНИЯ КОФ
A7 A A4 A3 A6 A8 A9 A5 A10 A2 A18 A13 A14 A1 A12 A19 A15 A20 A16 A17 A21 A22 A25 A23 A24 B1 B A7 A9 B6 B7 B8 B9 B2 B3 B4 B5 A11
2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 17 18 19 20 21 22 23 24 12 1 2 3 4 5 6 7 8 9 10 11 12 1 25 26 27 28
INDEX MAKING CAPPUCCINO (USING THE STEAM FUNCTION) ...................17 INTRODUCTION .........................7 CLEANING AND MAINTENANCE .....17 Symbols used in these instructions ..........7 Letters in brackets .....................................7 Troubleshooting and repairs ......................7 Cleaning the coffee maker .......................17 Cleaning the coffee grounds container .....17 Cleaning the drip tray ...............................18 Cleaning the water tank ........................
If repairs are required, contact Customer Services only. The addresses are given in the guarantee certificate provided with the machine. INTRODUCTION Thank you for choosing the automatic coffee and cappuccino maker. We hope you enjoy using your new appliance. Take a few minutes to read these instructions. This will avoid all risks and damage to the machine. SAFETY Fundamental safety warnings Symbols used in these instructions Important! The appliance is designed and produced for domestic use only.
DESCRIPTION Important! Do not grasp the coffee maker when it is out of the cabinet. Do not rest recipients containing liquids or inflammable or corrosive materials on top of the appliance. Place the accessories required to prepare the coffee (the measure for example) in the special holder. Do not rest large objects which could obstruct movement or unstable objects on the appliance. Description of the appliance (page 3 - A) A1. Cup tray A2. Service door A3. Coffee guide A4. Coffee grounds container A5.
button to display the next menu parameter). B8. Rinse button : performs a brief rinse to heat the infuser. (When you access the MENU: "CHANGE" button to modify menu parameters). B9. button: to deliver hot water or confirm. (When you access the MENU: OK button to confirm menu parameters). If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.
BUILT-IN INSTALLATION 22 mm 455 mm Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets. Important: m m 15 m 372 mm • 595 m 528 m m 361 mm m 45 m 45 mm m 45 m 45 mm 450 • Important: all installation or maintenance operations must be performed with the appliance disconnected from the mains electricity supply.
x 16 with legislation. Electrical connections must be performed by a qualified electrician in compliance with the manufacturer's instructions and legislation in force in the country of installation. The mains socket should be easily accessible. x2 x4 Position the rails on the sides of the cabinet as shown in the figure. Fix with the screws, then extract completely. If the coffee maker is installed over a warmer drawer (500 W max.), use the top surface of this as a reference to position the rails.
USING THE APPLIANCE FOR THE FIRST TIME • • 1. 2. 3. 4. 5. 6. Important! To prevent malfunction, never introduce pre-ground coffee, freeze dried coffee, caramelised beans or anything else which could damage the appliance. Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. The machine is, however, guaranteed to be new.
9. "HOT WATER PRESS OK" is displayed. 10. Press the OK button (B9) The appliance begins delivering hot water and the message "PLEASE WAIT... " is displayed. After the flow of hot water stops, the appliance automatically resets to "READY" status. 1. Press the MENU button (B6) to enter the menu. 2. Press the NEXT button (B7) until "UNINSTALL FILTER" is displayed. 3. Press the OK button (B9). The appliance automatically resets to "READY" status.
a long coffee. To make 2 coffees, press the button twice (within 2 seconds). To change the quantity of coffee the appliance delivers automatically into the cup, proceed as described in the following chapter. (The appliance now grinds the beans and starts delivering the coffee into the cup. Once the set amount of coffee has been delivered, the machine stops delivery automatically and expels the exhausted coffee grounds into the grounds container. 4.
coffee correctly and should not require adjusting initially. However, if after making the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. A17) (fig. 11). Important! when removing the drip tray, the grounds container must be emptied, even if it is not completely full. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine.
deactivate the pre-ground coffee function by pressing the button (B2) (fig. 6) again to enable the coffee mill. NOTE 1: Never introduce pre-ground coffee when the machine is off or before pressing the button (B7) to avoid the coffee spreading through the inside of the appliance. NOTE 2: Never add more than 1 level measure, otherwise either the appliance will not make the coffee and the pre-ground coffee will be dispersed inside the appliance, dirtying it, or the coffee will be delivered a drop at a time.
• • • • • • This empties the cappuccino maker of all traces of milk. IMPORTANT: to ensure the hygiene of the appliance, you are recommended to carry out this procedure each time you make cappuccino to avoid stale milk remaining in the circuit. Wait a few minutes for the cappuccino maker to cool down, then holding the cappuccino maker lever firmly in one hand, unscrew the cappuccino maker itself with the other, turning it clockwise and removing it downwards (fig. 20).
month. 3. Empty the drip tray and grounds container (A4) and wash them; 4. Remove the drip tray complete with grounds container (A4). 5. Close the service door. Important! The infuser (A5) must not be removed when the appliance is on. Do not attempt to use force to remove the infuser as this could damage the coffee maker. Cleaning the water tank 1. Make sure the machine is correctly turned off (see "Turning the appliance off"). 2. Open the service door (A2) (fig. 13). 3.
mode or NEXT to change other parameters. If auto-start is set, when the appliance is in stand-by, press any button to display the auto-start symbol for 5 seconds. Setting auto-start time 7. Once inserted, make sure the two red buttons have snapped out. 8. Replace the drip tray (A14) and grounds container. 9. Close the service door (A2). This function programmes the time the machine will come on automatically to be ready for use.
Use of other descalers invalidates the guarantee. Failure to descale the appliance as described also invalidates the guarantee. Over time, constant heating up of the water used to make the coffee leads to limescale building up in the inner circuits of the appliance. When "DESCALE" is displayed, the machine requires descaling. Proceed as follows: • Make sure the appliance is ready for use and the water softener filter (if present) has been removed.
To increase the number of hours the machine stays on (max. 3), proceed as follows: • Press the MENU button (B6) then press the NEXT button (B7) repeatedly until the appliance displays: "OFF AFTER 1 HOUR". • Press the CHANGE button (B8) to change the number of hours the appliance remains on. • Press the OK button (B9) to confirm. • Press the MENU button to exit programming mode or NEXT to change other parameters.
extended period, place the main switch on the back of the appliance in the 0 position (A23). WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK • The water tank is empty or positioned incorrectly. • Fill the tank with water and/or insert it correctly, pushing it as far as it will go. GROUND TOO FINE ADJUST MILL alternating with PRESS OK • The grinding is too fine and the coffee is delivered too slowly. The machine cannot make coffee as there is air in the hydraulic circuit. • Turn the grinding adjustment knob one click clockwise towards "7".
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY DESCALE • The machine must be descaled. • The descaling procedure described in the "Descaling" section needs to be performed as soon as possible. LESS COFFEE • Too much coffee has been used. • Select a milder taste or reduce the quantity of preground coffee, then make the coffee again. FILL BEANS CONTAINER • The coffee beans have run out. • Fill beans container INSERT INFUSER ASSEMBLY • The infuser has not been replaced after cleaning.
TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM The coffee is not hot. The coffee is not creamy enough. The coffee is delivered too slowly or a drop at a time. POSSIBLE CAUSE REMEDY • The cups were not preheated. • Warm the cups by rinsing them with hot water. • The infuser has cooled down because 2/3 minutes have elapsed since the last coffee was made.
PROBLEM POSSIBLE CAUSE REMEDY The coffee is delivered too quickly. • The coffee is ground too coarsely. • Turn the grinding adjustment knob one click anticlockwise towards "1" while the coffee mill is in operation (fig. 11). Avoid turning the grinding adjustment knob excessively otherwise when you select 2 cups, the coffee may be delivered a drop at a time. The effect is only visible after delivering two coffees. Coffee does not come out of one of the spouts. • The spouts are blocked.
RECIPES Irish cofee Coffee punch Ingredients (serves 3): 2 spoons of sugar 1 spoon of water 9 teaspoons of whipping cream 6 spoon of Irish Whisky 4 cups of hot coffee Method: Boil the water and the sugar for approximately one minute then add to the Whiskey and the hot coffee. Mix and pour into stem glasses. Carefully pour the cream onto the coffee (3 teaspoons per glass). RECIPE TIP: lightly whip the cream so that it stays on top of the coffee. Grand Marnier or Calvados can also be added.
10 5713211921/02.