User manual

ManualsBrandsSmeg ManualsCooking Appliances30 Inch Freestanding Professional Dual Fuel Range with 4 Sealed Burners, 3.6 Cu. Ft. Oven Capacity, Storage Drawer, Continuous Grates, Manual Clean, True European Convection, 10 Cooking Modes, and 20,000 BTU Super Burner: Olive Green

Installation

13

EN

5. Move the bracket onto the wall and

mark the position of the holes to be

drilled in the wall.

6. After drilling the holes in the wall, use

wall plugs and screws to fasten the

bracket to the wall.

7. Push the cooker towards the wall, and

at the same time, insert the bracket in

the plate fastened to the rear of the

appliance.

Instructions for floor mounting

(secondary system)

The secondary anti-tip device is to be

attached to the floor when it is not possible

to install the primary system. After having

positioned and leveled the appliance the

bracket has to be anchored to the floor and

engaged in the slots at the rear of the

appliance.

1. Assemble the fastening bracket as shown

in the figure. Join the two parts without

tightening them too much since there will

be other adjustments to make.

NOTE: According to the type of

floor, the installer should supply the

suitable fastening systems (Type of

screw recommended

3

/

8"

).