User manual

ManualsBrandsSmeg ManualsCooking Appliances30 Inch Freestanding Professional Dual Fuel Range with 4 Sealed Burners, 3.6 Cu. Ft. Oven Capacity, Storage Drawer, Continuous Grates, Manual Clean, True European Convection, 10 Cooking Modes, and 20,000 BTU Super Burner: Orange

Installation

19

EN

Gas connection

Connect the adapter C (ISO 228/1 -

½ NPT) to the gas inlet of the appliance A

being sure to insert the supplied gasket B.

Apply a suitable sealing substance (such as

Teflon tape) between pressure regulator D

and adapter C.

Connect the pressure regulator D to the

adapter C put on in the previous step (the

arrow on the back of the regulator points

towards the gas inlet of the appliance).

Apply a suitable sealing substance (such as

Teflon tape) between pressure regulator D

and adapter E (½ NPT - ½ NPT) (not

supplied).

Connect the adapter E to the pressure

regulator D.

Due to problems of overall dimensions at

the back, screw in the pressure regulator so

that it is sloped at 45° vs the wall at the

back of the appliance.

WARNING: The tightening torque

of adapter (C / E) must not be

greater than 36 ozf - 10 Nm.