User manual
Conversion Kit
7
EN
• Incoming line pressure upstream from the
regulator must be 1” (2.5 cm) W.C.P.
higher than the manifold pressure in
order to check the regulator.
The range must be isolated from the gas
supply piping system by turning off the
respective manual shut-off valve during any
pressure testing of the gas supply piping
system at test pressures equal to or greater
than 1/2 PSIG (3.5 kPa).
4 Replacing the rangetop's burners
nozzles:
1. Remove all the grates and all the burner
caps (1) and heads (2);
2. Unscrew the burner nozzles with a 7 mm
socket wrench;
3. Replace the nozzles according to the
type of gas to be used and the
description in section 3.2 “Burner and
nozzle characteristics table”.
Ultra-rapid Dual burner
(A) Internal crown - (B) External crown
4. Put the burners back in their correct
position. Make sure that the holes of the
flame-spreader crowns are aligned with
the thermocouples (3) and igniters (4).