User manual

Installation
26
2. Secure the backguard to the top by
tightening screws.
Installing the front skirting
The front skirting must always be positioned
and secured correctly on the appliance.
1. Use a screwdriver to remove the front
screws undreneath the storage
compartment.
2. Position the front kick plate at the bottom
of the appliance and align the holes
marked by a circle in the figure with the
corresponding ones on the appliance.
3. Fasten the front skirting to the appliance
using the previously removed screws.
Installing the side skirting
After installing the front skirting, the side
skirting can be fastened correctly to the
appliance.
1. Position the side skirting on the lower side
section of the appliance below the
storage compartment.
2. Fit the tabs of side kick plate in the slots at
the ends of the front kick plate.