User Manual

Installation
66
The appliance can work in the following
modes:
• 220-240 V 1N~
Three-core 3 x 2.5 mm² cable.
• 220-240 V 2~
Three-core 3 x 2.5 mm² cable.
• 380-415 V 2N~
Four-core 4 x 1.5 mm² cable.
• 220-240 V 3~
Four-core 4 x 1.5 mm² cable.
• 380-415 V 3N~
Five-core 5 x 1.5 mm² cable.
Accessing the terminal board
To connect the power cable, you need to
access the terminal board on the rear
casing:
1. Remove the screws that fasten the
access plate to the rear casing.
2. Rotate the plate slightly and remove it
from its seat.